Jump to content
SAU Community

Recommended Posts

I tried to keep the guards as stock looking as possible.

The fronts even have the factory crease put back in them! rims are 17x9 +20 with slightly stretched 225/45 all round. Now there is plenty of room ill lower it some more and see what size tyres i can fit.

post-43010-1210658094_thumb.jpg

post-43010-1210658144_thumb.jpg

Edited by nee-sanRB20
  • Replies 131
  • Created
  • Last Reply

Top Posters In This Topic

there is no way in hell you can safely run 30mm spacers...

i run 3mm on the fronts just to clear the calipers.

you will need either:

a custom unit

a bolt on set if there is one available

new wheels

lol hahah yeah didnt think it would be.

so if i got a bolt on set then that should be ok?

thanks for your help guys, will have to search around for some.

peace

Gez

not as stock as yours lol but im sure you get the idea.still trying to find rimms to fill the guards up.the fronts are still yet to be done

I achieved a similiar result - only I have 18 inch deep dish rims to fill the guards -I will upload pics soon.

how do i go about doing that??

looks like glass guards yes ? you would need to spend alot of time adding extra fibreglass along that line, then grind back and use high fill and masking tape to get the sharp line to follow from the front end through the doors and into the guards.

  • 2 weeks later...

we had to cut out some bits of my car, so we decided to have some fun beforehand... thought of this thread and the "natural guard flaring" techniques discussed.

its natural... honest. best results guaranteed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...