Jump to content
SAU Community

Recommended Posts

hey everyone i was just wondering if anyone could help as i have posted before about cv's and had a little bit of luck but only on who to see

,i am looking at getting it all fixed up this week as my cv's and coil packs are fu*#ed. does anyone have a part number for cv's or knows a place in perth that does them for stags(s1)

and also does anyone in know where to get the coil packs from,either splitfire or stock,i am fixing that up and a little ding my fiancee done when she reversed into it,then i am selling her. any help would be great,thanks

Link to comment
https://www.sau.com.au/forums/topic/217965-help-please-perth/
Share on other sites

get some splitfires of ebay for 500 and install them yourself. probably go new plugs to.. if your selling i wouldnt worry about the exhaust, your just gonna lose money

cheers,were they just for a rb25 then??

try " alans cv joint " in osborne park

they did a good job on some CV joints I had before

and yeah- go the splitfires

hey everyone i was just wondering if anyone could help as i have posted before about cv's and had a little bit of luck but only on who to see

,i am looking at getting it all fixed up this week as my cv's and coil packs are fu*#ed. does anyone have a part number for cv's or knows a place in perth that does them for stags(s1)

and also does anyone in know where to get the coil packs from,either splitfire or stock,i am fixing that up and a little ding my fiancee done when she reversed into it,then i am selling her. any help would be great,thanks

i am fixing that up and a little ding my fiancee done when she reversed into it,then i am selling her. any help would be great,thanks

sorry then you're selling ...the car, right?

Shame to get rid of the stagea surely... how can one go back to a boring old Australian car after a Stag???

sorry then you're selling ...the car, right?

Shame to get rid of the stagea surely... how can one go back to a boring old Australian car after a Stag???

true true,although i my daily driver was a very nice vq statesman(i think it was nice,want to be after $20000 been spent) then i crashed it,took the stag off the mrs and bought her a crv,:) if i can do a bit more work to her and get the power up id say id keep her

  • 4 weeks later...

hey guys thanks for the info,i took the wagon to alans in ozzy park on thurs,gota call fri and they said the shafts have to be machined as no one makes them for skyline running gear,and then gota call sayin they went to get the part off shelf(boot i think) and it wasnt there,cant get the stag back till tues :D and i sourced some splitfires for $400....Is that a good price?so next week she will be all up to scratch.thanks again

$400 delivered for (new?) splitfires? You suck! :D I just got mine last week for $500, so you did very well...

:huh: yeah brand new delivered,called just jap and they wanted $699 so i thought i was doing ok,they are easy to install right?

Edited by stagpower

hey matey - if you need a hand doing the coilpacks I can help

I am scheduled to do ours this weekend.. or very soon - so I could show you how to do yours at the same time -basically its not hard- just fiddly really..

and some of the alan keys holding the coil pack cover on can be a bitch to get to .

could you please tell me whats involved,just the top cover then some screws/bolts? cheers
hey matey - if you need a hand doing the coilpacks I can help

I am scheduled to do ours this weekend.. or very soon - so I could show you how to do yours at the same time -basically its not hard- just fiddly really..

and some of the alan keys holding the coil pack cover on can be a bitch to get to .

yeah mate sounds good,where ya based?would make it a bit easier, i'l bring some beers,

get your CV joins rebuilt its much cheaper compared to replacing a brand new ones. Half the cost to rebuilt the CVs

got both side for $340.00 which from what my mates have paid for like telstars etc it is good,just waiting on coil packs to get here now.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...