Jump to content
SAU Community

Recommended Posts

don;t worry the pits at wakie are nice and flat, not like oran park. no chocks required there

just park the car with handbrake off and out of gear when you finish. And take it easy on the cooldown lap, and do a lap or 2 of the pits if you think they are still too hot

  • Replies 547
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Abo,,,,I'm coming with the Handleys,,,so if you need help,,,just ask buddy.

I'll also bring both helmets,,,someone might want to buy them.

Steve-o with his own garage and heater,,,how gay,,,next car will be an MX5 you raving poof.

Neil.

another question do you take the back seats out before you go or do you take them out when your there, and if you do take the seats out, have you been pulled over by the cops and had any dramas.

i had my back seats out for almost half a year now, no dramas from the cops or anything, gotta put them back on this weekend, coz

im taking 2 mates :laugh:

do you bring something to chock the wheels for when you come straight off the track?

Nah

Abo,,,,I'm coming with the Handleys,,,so if you need help,,,just ask buddy.

I'll also bring both helmets,,,someone might want to buy them.

Steve-o with his own garage and heater,,,how gay,,,next car will be an MX5 you raving poof.

Neil.

lol, im not freezing at wakefield anymore. That place is as cold as ice this time of the year

Here's the list for scruitineering:

-No loose items in the cabin

-No fluid leaks

-Brake lights working

-Some tread left on tyres

-Secure panels

-no loose seats, seatbelts

-checking fire extingushers if there is any.

-checking helmets

-checking apparel if there are any

-wheelnuts

-cabin is fully sealed off

Guys is easier to fix any issues now, rather than on the day

Here's the list for scruitineering:

-No loose items in the cabin

-No fluid leaks

-Brake lights working

-Some tread left on tyres

-Secure panels

-no loose seats, seatbelts

-checking fire extingushers if there is any.

-checking helmets

-checking apparel if there are any

-wheelnuts

-cabin is fully sealed off

Guys is easier to fix any issues now, rather than on the day

Just another newbie question regarding the definition of loose items. Are items such as laptops, dataloggers and thermocouple readers etc allowed??..

I am assuming yes as long as they are strapped or tapped down and not free to move around the car??? I was going to make some brackets and use velcro straps, cable ties or gaffa tape???

Just another newbie question regarding the definition of loose items. Are items such as laptops, dataloggers and thermocouple readers etc allowed??..

I am assuming yes as long as they are strapped or tapped down and not free to move around the car??? I was going to make some brackets and use velcro straps, cable ties or gaffa tape???

Nope, sorry not allowed.

Anything that isn't welded, or screwed in is prohibited.

Edit: Unless you want to keep your dataloggers in the glove box (must be shut), that I will allow.

Nope, sorry not allowed.

Anything that isn't welded, or screwed in is prohibited.

If it is bolted does it need to be bolted to car body or will bolting to the console do??

Also with the Wakie license I take it we get that from Wakefiled admin people first thing in the morning before scruitineering??

If it is bolted does it need to be bolted to car body or will bolting to the console do??

Also with the Wakie license I take it we get that from Wakefiled admin people first thing in the morning before scruitineering??

Wakie license yes at the admin office. You might want to go through scrutineering first as you will be in one of the first groups and there will be a line.

As in bolting to the centre console?

If you could make a steal bracket and bolt it to a structural point that would be fine.

But it would be hard for me to say yes over the net for something I haven't seen. If you want we can talk about this over PM or if you come down to mikes the night before I can try and help you figure something out.




  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...