Jump to content
SAU Community

Recommended Posts

Hi all,

Going to install some T517z's on my gtr and havent made up my mind which dumps to use. Ive seen SK posted that some dumps will interfere with the actuators on the T517z, but ive also seen posts where people are using HKS and Xforce dumps on them. URAS aparently used stock dumps on his T517z engine.. but ive been unable to confirm.

Im told that dump upgrades are one of those "must do" mods, for the gtr. Everything else is in place to make 300kw so all i need is the dumps, or to port the ones I already have...

Suggestions?

Cheers,

Ian

Link to comment
https://www.sau.com.au/forums/topic/219798-which-dumps-go-with-t517zs/
Share on other sites

I'll add that the car already has a nismo front pipe, so id prefer to not have to change that to the trust setup with the crazy long trust dumps that i have also seen. Just replacing the dumps is all i really want to do... if thats whats recommended.

Edited by Vspec R33

keep the nismo pipes, they are very nice. the only ones I've seen that I liked more are the current model HKS ones which are welded on the inside. and have larger 70mm primaries instead of the 60 or 65 the nismo ones are.

there is really only one choice for GTR dumps at the moment I reckon. TOMEI. very nice. big open design. proper 70mm outlet (not 60odd like HKS ones), big open bell mouth so little to no chance of your wastegate flap hitting anything either.

here are some pics of a set I bought a few years ago when they first started doing this type.

picture005lv4.jpg

picture015ah9.jpg

picture008oy1.jpg

picture018pr1.jpg

picture017kp5.jpg

in fact I may even have a set lying around I can part with if you need some in a hurry.

Thanks Beer Baron. I do like the tomei ones they look very nice. Im not in a hurry at the moment to do the turbo and dump pipe swap, though if you do want to sell what you have let me know a price?

So is the problem with other aftermarket dumps pipes used with T517z's the the wastegate flap valve interfering with the dump pipes that have a seperate wastegate port? Like the hks ones? Why couldnt that be fixed with a die grinder, or can it be?

If only i had one of everything ever made I could see what fits with what...

Edited by Vspec R33

correct me if I am wrong but my understanding of the Trust T517z is that the wastegate itself swings in the other direction ( Not a Gay joke ) which is why the dump pipes that have a split dump pipe eg type that has a seperate pipe for wastegate exhaust cannot be used....Thats my understanding

correct me if I am wrong but my understanding of the Trust T517z is that the wastegate itself swings in the other direction ( Not a Gay joke ) which is why the dump pipes that have a split dump pipe eg type that has a seperate pipe for wastegate exhaust cannot be used....Thats my understanding

I belive your are 100% correct, thats what i read in a Zoom mag ages ago when they put them on a GTR (not that you should take Zoom as gospel lol)

Well here is a pic of one of my T517z 8m turbo's. I guess i just need to find a HKS GTSS/GT2530 for comparison now...

I just checked my friends Garrett 2871 and the flap does in fact go the opposite way.

Edited by GTR1993

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...