Jump to content
SAU Community

Recommended Posts

Just want to know where I can buy some brand new r33 series 2 headlights from? I washed my car the other day and now there is like a haziness to them, I cant explain, I thought originally it was just condensation from the wash but theyve been like that now for 2 days.... Other than buying new ones is there anything I can do?

Ev.

Link to comment
https://www.sau.com.au/forums/topic/219837-r33-sii-headlights/
Share on other sites

Just want to know where I can buy some brand new r33 series 2 headlights from? I washed my car the other day and now there is like a haziness to them, I cant explain, I thought originally it was just condensation from the wash but theyve been like that now for 2 days.... Other than buying new ones is there anything I can do?

Ev.

New headlights are like 600$ each. The seal between the 2 parts of your headlight is probably just broken. Just take the headlight off, remove the bulbs and leave 'em open until the condensation evaporates. Then go to Supercheap or similar, spend 10$ on a new sealant and re-seal the thing. Beats paying 1200$ or so for a new pair of lights IMO.

I had the same problem when I bought my car bout 2 years ago (and it would also take ages for the condensation to disappear). This did the trick just fine.

He's got condensation/water in his headlights so the seals are stuffed. Polishing will never get it out as it's on the inside.

Keep searching on yahooauctions Japan and a new set will pop up from time to time.

The best thing to do would be to just open the headlight up and clean everything inside and reseal it up with new seals. Make sure the cover for the globe plug is tight as well. Moisture can get from the globe plug hole and make it dirty.

I'm soooo suprised that no one does aftermarket headlights for R33 skylines, or hell, even a glass replacement instead of the crap plastic. My mate recently bought glass replacement headlights for his supra and they make it look 100 times better. If some one can make glass replacement headlights for a R33 SI or SII im sure they would make a killing! HINT HINT!!

Edited by PM-R33

I second a group buy too! I might play around with them on Friday as it is my day off. Ill try a bit of cutters on the lense see if that helps otherwise it's inside the light as I suspected... Grr.. I've only had the car for a week :woot:

Cheers.

I have had this same problem to when i got my car.. First clean i did on it i was like eww these lights look so bad lol, But i saw it on alot of 33's so kinda figured it was normal.. I tried alot of things on them But a after market polish i use is great. Also Meguiars paint cleaner ( i think it is ) is really good to, but it only keeps them clear for a week or so and then they start to go yellow again so i might try some brasso! And as for the condensation i have that as well.. Its just im not 100% sure about what u mean by resealing like where on the light do you reseal?

I have had this same problem to when i got my car.. First clean i did on it i was like eww these lights look so bad lol, But i saw it on alot of 33's so kinda figured it was normal.. I tried alot of things on them But a after market polish i use is great. Also Meguiars paint cleaner ( i think it is ) is really good to, but it only keeps them clear for a week or so and then they start to go yellow again so i might try some brasso! And as for the condensation i have that as well.. Its just im not 100% sure about what u mean by resealing like where on the light do you reseal?

The part you reseal is where the front cover (the part that is dirty) and the rear part (where everything is held onto, black part). Where those two meet, you've got to seal it up again. Here's a picture to explain what I'm talking about. hahha

post-32186-1211537249_thumb.jpg

The cover you take off to clean 'connects' to this part circled.

My english sucks ass, can't explain anything, I just hope you understand what I'm trying to say. :)

So, I went and bought some cleaning products for my car the other day. I bought Meguiars Scratch X Swirl Remover, Meguiars Deep Crystal Polish, Meguiars Caranuba wax, applicators, microfibre cloths. etc. I went to wash my car that day and polish it and looked at my left headlight (which was really bad) and it was pissing me off, so I thought hmm what if I use some scratch X on it... I get the applicator out dab it in and start scrubbing, you need a lot of elbow grease here, I get my microfibre and wipe off and the head light looked awesome! I applied 2 more coats then I polished the headlight and then applied wax. I did it to both and they look like i've bought brand new lights now. Ill take photos possibly tommorow and post up. They look awesome now. Instead of spending 1000 dollars on new lights I spent 30 bucks on some swirl remover and they look a treat.

Cheers.

Ev.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
×
×
  • Create New...