Jump to content
SAU Community

Recommended Posts

yep sure am in the middle of nowhere i just wish i could get it tuned without it being on my car but owell. hey btw do you guys know the previous owner of my car his name is ryan and it used 2 be a customer car for gt autosound and was full of mbquart audio gear it had sly on the number plates.

Yeah i know him. I work with him and use to cruise with him before i sold my skyline. His/your car now was hardly ever driven and he always had that thing clean. Think he only sold it cos he wants a GTR.

Link to comment
https://www.sau.com.au/forums/topic/220029-morpowa/page/2/#findComment-3891705
Share on other sites

Simon P is the only person that will be touching my JZX81.

He is the nly person I trust and am Sponsored by him.

He repmapped my R32 with no issues at all.

You pay for what you get.

My R32 made 190rwkw with a very very safe tune. another R32 that got done by another company made 20rwkw less with more mods then mine. GO FIGURE.

GO with whoever you wish. But your drive over will be boring and your drive back will be very fun

Link to comment
https://www.sau.com.au/forums/topic/220029-morpowa/page/2/#findComment-3893466
Share on other sites

hey guys i recently bought a power fc and i need it tuned , my mate in adelaide recomended morpowa are they any good? is there anything i should know before i travel 1500 k's to get my car tuned??? any help would be good .cheers.

NO

I would get monkeys to tune it b4 they touched it

use willallor boostworx

Link to comment
https://www.sau.com.au/forums/topic/220029-morpowa/page/2/#findComment-3894853
Share on other sites

NO

I would get monkeys to tune it b4 they touched it

use willallor boostworx

prob keep your negative comments to yourself ay?

this is someones business your talking about here.

i use simon, i have not had any probs with him, or the workshop.

if you feel the need to slag off a workshop in this manner, try using PRIVATE message.

Link to comment
https://www.sau.com.au/forums/topic/220029-morpowa/page/2/#findComment-3894933
Share on other sites

prob keep your negative comments to yourself ay?

this is someones business your talking about here.

i use simon, i have not had any probs with him, or the workshop.

if you feel the need to slag off a workshop in this manner, try using PRIVATE message.

lets not fight boys :P

Link to comment
https://www.sau.com.au/forums/topic/220029-morpowa/page/2/#findComment-3895004
Share on other sites

prob keep your negative comments to yourself ay?

this is someones business your talking about here.

i use simon, i have not had any probs with him, or the workshop.

if you feel the need to slag off a workshop in this manner, try using PRIVATE message.

+1.

The only bad comment i have heard about Morpowa is from kids playing with there boost controllers/ Computer controllers and playing with settings and popping there engines.

Simon and the boys at Morpowa have/ will do anything to help out any of there customers

Link to comment
https://www.sau.com.au/forums/topic/220029-morpowa/page/2/#findComment-3895934
Share on other sites

prob keep your negative comments to yourself ay?

this is someones business your talking about here.

i use simon, i have not had any probs with him, or the workshop.

if you feel the need to slag off a workshop in this manner, try using PRIVATE message.

+1 simon n the guys at morpowa r awesome if any1 wants 2 go slaggig them ill post a horror story about boostworx!!!! simon tunes my car and did an awesome and managed 2 pull 300rwkw on just 16 psi on a very safe tune, but if u go changing ya settings on ya power fc or boostcontroller yourself then u r asking 4 trouble if willal dont have time 2 tune it they'll reccomend morpowa coz simon n martin are great mates...

Link to comment
https://www.sau.com.au/forums/topic/220029-morpowa/page/2/#findComment-3896074
Share on other sites

At the end of the day, he asked for an opinion. Everyone will offer their own opinion

Theres probably good and bad stories from every tuner in Adelaide. Im not going to say a bad word against simon / morpowa just on what i have heard. I recommend Boost Worx however because they're local to me and ive never had a problem with Shaun / Troy and their workmanship. I stay loyal to a workshop and they look after me

So lets all stay a bit cool about it and not take any "nah, i wouldnt take my car there" comments to heart. For me, even if Morpowa are that good, i cant justify carting my car on a trailer a 45min drive across town for a tune when i have as good a tuner 15mins away.

Link to comment
https://www.sau.com.au/forums/topic/220029-morpowa/page/2/#findComment-3896322
Share on other sites

dude you need to not read into it as much big deal he would rather go to the zoo and have his car tuned there that's his choice

at least he didn't call simon a monkey

'you' ask a question about something expect someone to say i wont go there again, he didn't slag them or defame them so really your good mates with simon and you stand by him that's good, doesn't mean Mike has too

Link to comment
https://www.sau.com.au/forums/topic/220029-morpowa/page/2/#findComment-3896387
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Ok guys thank you very much. GCG highflow it is then 🙂 
    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
×
×
  • Create New...