Jump to content
SAU Community

Recommended Posts

Make: Nissan

Model: 89 R32 GTR

Milage: 103 000 km

Transmission: Manual

Colour: Black

Location: NSW Central Coast

Complied? Yes

RWC supplied? N/A

Currently registered? Yes

Price: $26,500

Contact: Scott 0422802102 I am away from home for 2 weeks at a time so i may not answe my phoner. Best off pm me and i will let you know when im home

Comments / Modifications:

Looking at seeling my R32 GTR due to now spending most of my time in WA working and dont get to drive it as much s id like

I have owned the car for around 2 yrs and was almost stock when purchased apart from wheels and few other mods.

The car is due for rego in june but will be supllied with 12 months rego.

Car was tuned by croydon racing developments and made 346awkw on 18 psi. Have also ran a 10.907 @ 129.9mph with a 1.635 60' on street trim minus sub and spare wheel

Mods to car are

Full rebuilt motor approx 7000 km's ago

Arias 87mm forged pistions

Eagle H beam rods

ACL race bearings

Cometic metal head gasket

Crank Collar fitted

Crank grub screwed

Full engine balance

Tomie oil restrictor

Ross tuff bond Balancer

N1 oil pump

External Oil drain from back of head to sump

Tomei Sump baffle

Billet Cams 260deg 9.15mm (pon cam coppies but stronger)

Performance Valve springs

Adjustable cam gears

Full port and polished serviced head

Gates racing timing belt

HKS 2530 turbos's

Trust 120mm Drag intercooler

Greddy Hard intercooler piping kit

Apexi pods

RB20/25 AFM's

Trust metal throtle body gaskets

GREX/TRUST oil cooler with thermostat and fillter relocator

Adjustable oil pressure switch fitted with 3 ultra bright LED's which come on if oil pressure drops below 25 psi

Custom made oil catch can

Sard 700cc injectors

Bosch 044 fuel pump

Apexi PFC

HKS EVC 4 bost controller

Split Dump pipes

Twin 3 into 3.5 inch custom stainless fron pipes

3.5 inch apexi cat back exhaust

Nismo Twin plate clutch with new plates fitted when engine rebuilt

Tein adjustable coil overs

Hicas lock bar fitted and lines, solenoids etc removed

Work Amkread 18x9 +22 rims

4 brand new tyres & 4 wheel alignment

Images:

post-10986-1211360068_thumb.jpg

post-10986-1211360106_thumb.jpg

post-10986-1211360127_thumb.jpg

post-10986-1211360166_thumb.jpg

post-10986-1211360227_thumb.jpg

post-10986-1211360241_thumb.jpg

post-10986-1211360261_thumb.jpg

post-10986-1211360302_thumb.jpg

post-10986-1211360350_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/220281-350awk-10-sec-r32-gtr/
Share on other sites

WOW

that is very nice, love the rims and cheap too!!!!

Good luck with the sale mate

+1, it looks awesome, this will sell very very quick i reckon, once i fix my car (waiting on parts) and sell it im praying this car is still for sale and ill be coming over from Perth, its definately what im after. I doubt it will be around that long though unfortunately :D

good luck on the sale, i know how much all those mods would have cost and this isnt much more than all these stock engined r32 gtr's, well worth it :O

how is the overall condition body/paint and interior wise?

+1, it looks awesome, this will sell very very quick i reckon, once i fix my car (waiting on parts) and sell it im praying this car is still for sale and ill be coming over from Perth, its definately what im after. I doubt it will be around that long though unfortunately :rofl:

good luck on the sale, i know how much all those mods would have cost and this isnt much more than all these stock engined r32 gtr's, well worth it :P

how is the overall condition body/paint and interior wise?

The front bar has a few marks on it and could probably do with a respray and the boot and lip could also du to some marks where the spoiler holes where filled. But these few things did not worry me.For the age of the car the rest of the paint is excellent.

it looks like itshad a respray before, are you negotiable on the price?

It may have been resprayed before i purchased it. I am some what negotiable on the price but no crazy offers.

couple other things i left out

twin blitz BOV's

jvc mp3 head unit

jbl sub and box

2wd/4wd switch hooked up to factory fog light switch

momo steering wheel

Alarm/immobiliser and central locking

also link to car on the dyno a couple weeks ago where it made 355rwkw

hey mate. awsum car u hav there. exactly wat im lookin for.

wats d best price u can do. i mean best price??

Thanks mate. You make the offer and i say yes or no. Ive already had a friend who said he would buy it for a price in the low 20's so i would sell it to him for that before someone else.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...