Jump to content
SAU Community

Recommended Posts

its probably a stupid question, more out of curiousity then wanting to actually do it, but is it possible to shutdown 2 or 3 cylinders while driving for fuel economy? ie turn off some of the injectors temporarily or another way? im sure its not that simple and theres probably some bad effects on the engine/fuel system which is why no one does it, but if someone could explain why its not possible i would be interested to know. i was thinking of a 8 cylinder engine i read about a while ago that runs on half its cylinders to save fuel economy until you floor it, and then it runs on all the cylinders.

theres a bit of information on the internet about it 'firing on half-cylinders' or 'cylinder deactivation' but im interested if its possible to implement a similar thing on standard cars.

its all in the ecu.

The new computer from ray hall would probly be capable of doing this if they wanted too.. i dont think there are any aftermarket ecu's that do it at the moment.

Make one. let me know how you go :(

Its both electrical and mechanical

From what i've kind got to understand its actually the valves on the particular cylinder being held open through the use of oil, flow of oil to hold the particular valves open obviously would be commanded by the ecu once it knows the car is at a cruising point where it can shutdown cylinders. i had it explained to me a few weeks ago but i forgot how and what actually happens. we were talking about it at work today, its how I kind of remember.

i think maybe its like vvti, vtec? where the valves are open for a little longer at higher rpm, but instead constantly held open

dont quote me on this either, as im not 100% but will definately find out again.

Apparently this function is already in the VE commodores, but due to vibration are not enabled.. so we'll most probably see it on the next series once they have their vibration problems sorted.

Edited by shAkIeL

what im interested to know, is just say you can make a switch that turns off three of the injectors, and use this switch when you dont need power (ie driving in traffic) im pretty sure you can turn off injectors using a laptop connected to consult port, but if you do this, is it safe for the engine, and would it screw up the fuel mixtures etc? i would have though if half the injectors are available, half the fuel is being delivered, and its in proportion so it should still run ok but with much less power? or is it more complicated then that?

some information on the net says the engines that have this done (using the physical system on the valves of the cylinders), get up to 20% more fuel economy.

With factory cars that do it they keep the valves open, as if you just turn the injectors off you will still have mechanical loses from compressing air. It will also run incredibly lumpy and probably not idle properly.

Basically dont bother unless you feel like engineering a head that can force the valves open.

What i do know is that the system in the Chrysler 300C actally alternates which cylinders are shut down, otherwise you would have uneven wear within your engine.

And according to reviews in some major motoring publications, it doesnt really give a dramatic improvement in real world economy.

Its still all new technology so I dont think we're going to see any real improvement in fuel economy from cylinder deactivation for a couple of vehicle generations yet.

I think its only a sales gimmic...like hybrid cars. Pseudo-green cars.

In my opinion you want economy go buy a new diesel golf. (i die a little inside when i suggest someone buys a diesel).

Would be a laugh to try it, pick up a sh!t box from a wreckers and wire a switch to deactivate 2 injectors like you suggested. Just dont spend any money on the thing.

I think it's a stupid idea, just for marketing really at a time when people are more fuel conscious. All that mechanical energy is being wasted by driving the inactive pistons, its just stupid. I like the idea of having a smaller capacity turbo charged engine, and using right foot to lower consumption.... Not that that actually ever works in real life hehe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...