Jump to content
SAU Community

Recommended Posts

hey guys i blew my stagea up.cracked 2 pistons and broke the ring lands off 2 others. was about to bore the block when found it to be cracked between number 4 cylinder head stud bolt and the water jacket .has anyone herd of this before i know 26s had this problem but not 25s . well long story short i need a new block would anyone know where there is one layin around. cheers bernard .

Link to comment
https://www.sau.com.au/forums/topic/220621-my-stagea-has-a-cracked-block/
Share on other sites

http://www.japparts.com.au/products/engines.html

Nizpro (Nispro?) on the Gold coast have a few stags sitting there, apparently, as well. I'll see if the youngsters know of any around the place as well...

It may be cheaper to jusy source an RB25 N/A for a Sky.

Generally Importers rub their hands in glee when you mention Stag, and the price can go up.

I was at Nizzpro last week and they had a couple of wrecks and a half cut, There were also RB25 motors lying around.

Ring Jeff Anderson 0413 729 446

thanks guys . yeh i bought everything forged for my engine now i have to buy another to put it all in it sucks arse cant belive my luck .but all i keep thinking is it ganna haul when its done hope to get big power out of this one .for the dollars spent .killed my paint job funds dam it but all be worth it in the end cheapest block i found so far is 1 g they wont take the head and sell it to me cheaper so gotta take it all .but they were willing to keep the diff the bastards that was the first thing they said it would be sold with out .

every time an RB25 drops a ring land, baby jeezus cry's.....

Baby jeezuz spends a fair bit of time crying usually.

What caused the meltdown anyway? What sort of boost? There is a bloke on here somewhere that is keeping a thread running about engine failures, make sure you do a search and have a read.

every time an RB25 drops a ring land, baby jeezus cry's.....

Baby jeezuz spends a fair bit of time crying usually.

What caused the meltdown anyway? What sort of boost? There is a bloke on here somewhere that is keeping a thread running about engine failures, make sure you do a search and have a read.

was i little bit of my own fault really. i had a gt34r turbo high mounted and 40mm gate which was mounted near the steering rack .i have the worst luck that when was doing high speeed and high revs a stick or some thing tore the wast gate line off and so be it .was only a split second and herd the wast gate shut and hit the clutch strait up but looked in the mirror and could not see the road behind . then the flames came oil all over a glowing turbo not a good combo. was massive boost as it has stretch the impellor shaft in the turbo and all.

so yeh now the head is flowed full forged everything for the bottom end cams and gears and trust intake with 90mm throttle body and a gt35 82r turbo thanks to gcg .

everything is sitting at advan waiting to go just trying to sought out this bottom end and to rb30 i will see how i go with this bottom end in sydney if it is a dud i will def take yours for sure .

as for the wast gate lines going all braided this time . alot of money for a stupid bit of hose and a split second. but cant complain of how the car was hauling before the implosion .

last tune was 255awk so hope this time will be a little bit higher power figure .fingers crossed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...