Jump to content
SAU Community

Recommended Posts

I heard about this, The WRX's were going to be trialed here, so they decided to thrash a few around, see if they were as tough as they thought, this was suppost to be on the secret but subaru found out about how they were being treated and revoked their warantee. Also their Speedos wern't accurate enough for police use.

This is what I heard, don't know who true it is.

Greg.

Link to comment
https://www.sau.com.au/forums/topic/22072-police-in-wrx/#findComment-471921
Share on other sites

Originally posted by SKYLINEGTR

WRX'seses what they going to catch with that ?

Everything this side of a worked GTR.

And in the wet unless the GTR driver is very skilled with the handling of an "R" (ie Ken)... Everything.

Link to comment
https://www.sau.com.au/forums/topic/22072-police-in-wrx/#findComment-472389
Share on other sites

Originally posted by R34

Everything this side of a worked GTR.

And in the wet unless the GTR driver is very skilled with the handling of an "R" (ie Ken)... Everything.

provided that the bad guys are racing along the stop-light grand prix and in traffic I'd beleive you.

BUT some badguys go over the speed limit, and some do crazy things like go from 60 to 150 ......

Link to comment
https://www.sau.com.au/forums/topic/22072-police-in-wrx/#findComment-472623
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...