Jump to content
SAU Community

Recommended Posts

Hi all.

I have noticed a lot of Stageas popping up so I thought I would post up what I have to lend out to get people through regency or off defect;

- Stock exhaust for a S1

- Stock suspension that came out of a S1 but will fit a S2 providing it isn't a RS-Four-S (factory manual as the mounts are different).

- Stock suspension from my S2 RS-Four-S with RS*R springs that are way over legal height which will also fit a RS260 I am told.

Cheers,

Peter.

Hey, was wondering if someone could lend me the Tein spanners so i can adjust my ride height. I have the "HA" Tein Coilovers..Possible even give me a hand lowering it.....never done it before.. cheers

pm sent

i have a 33 sitting at home, if any1 needs any parts to get through regancy just let me know, mine has just gone through regancy, cost me $13,000 cause of all the shit i had to buy for it, didnt know any1 in adelaide to borrow from, lol, thats is until the car sells, cheers ken

i have a 33 sitting at home, if any1 needs any parts to get through regancy just let me know, mine has just gone through regancy, cost me $13,000 cause of all the shit i had to buy for it, didnt know any1 in adelaide to borrow from, lol, thats is until the car sells, cheers ken

you could have bought a nice series 1 r33 for that price ... lol

  • 2 weeks later...

Have the following stock parts available for R34 GTt. PM me if u want anything, its all boxed up in my shed just incase i need it

air box with filter

BOV

Intercooler

Cams

Injectors

Front Pipe

Cat Back (sorry cat center is punched out)

Rims with tyres

AFM

Fuel pump

ECU

Pressure plate (needs new center bearing)

Clutch

Flywheel

In need for compliance: (if people want to sell it to me thats fine)

R32 GTR seat

R32 GTR standard suspension

R32 GTR standard exhaust

R32 GTST standard suspension

R32 GTST standard exhaust

R32 GTST all standard arms :)

R32 GTST intercooler

Cheers,

Guys

In need for compliance: (if people want to sell it to me thats fine)

R32 GTR seat

R32 GTR standard suspension

R32 GTR standard exhaust

R32 GTST standard suspension

R32 GTST standard exhaust

R32 GTST all standard arms :P

R32 GTST intercooler

Cheers,

Guys

Cheers guys, Already got some parts lent to me.

Also after;

R32 Standard Steering Wheel

R32 Uncut Reo

Edited by JiN_MaN
Have the following stock parts available for R34 GTt. PM me if u want anything, its all boxed up in my shed just incase i need it

air box with filter

BOV

Intercooler

Cams

Injectors

Front Pipe

Cat Back (sorry cat center is punched out)

Rims with tyres

AFM

Fuel pump

ECU

Pressure plate (needs new center bearing)

Clutch

Flywheel

Also have standard coilpacks

Sorry CAT was binned when high flow cat was put on

  • 2 weeks later...

Petrol Generator 2000W or more

Has anyone got a generator I can borrow for a week. I need to drill 600 holes into concrete and there is on power at the site. With any luck I will finish over the weekend, but if it was possible to use it early next week as well that would be great.

PM me if you can help.

Guy

he copied me :blush:

LOL...are you being serious?? No offence luke but i have never even seen your car, let alone copied your 'style'..My girlfriend bought one over a year ago and wen this one came up at the right price i couldnt resist..As for the WORK rims well if youve got em, why not use em? dont stress mate, i wont rain on your parade, clearly your the original 34 4door style guru wizard... :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...