Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

  Quote
Originally posted by PHaT MR30

Jap drifting is about being 90 degrees to the corner. before, during and after the corner.

doing a skid round a corner and kicking the back end out is not drift

no its not jap drifting is pointing the nose of the car at the exit angle of the turn. drifting can be done by 6 different methods.

1) E-brake

2) Shift-lock

3) braking

4) Fainto

5) Power over

6) Dynamic

if you really REALLY want to know and want to buy a kick ass DVD you should get the Speacial edition Best Motoring Drift Bible it is bad ass. Keiichi Tsuchiya is teaching you how to properly drift

"funkymonkey" when does it stop being a drift and become a powerslide. it becomes a power slide when you loose traction after the turn has passed, if you slide and hold it anywere before during or just before the end or the corner is drifting, you could use power sliding for drifting also you can power slide one way and when you regain traction it tosses you to the other direction and you use that as a "Dynamic" drift it is really simple after you watch that Video its cool shit.

  Quote
Originally posted by cowboyb

I just thought drifting was losing traction whilst doing a corner and regaining control from the slide before to slide into a curb...I guess I could be wrong, since I dont drift myself :D

That's pretty much what all the ppl that try to be heros on the city roads do... and that's so not drift... and then they go "aw man did you check that mad drift I just pulled?"
  • 9 months later...

ok, i've seen those tutorial vids too. And it's a load of crap how everyone suddenly goes off using all these terms that the japs use, such as 'e brake' lol, like WTF? i think you mean handbrake?

I agree that these habibs that do fully sick schidds around the corner are not drifting. The idea with drift is put the wheels out of traction while still being in control. I notice that some of you guys reckon that it is not a drift if you are not pointing out before the corner. It is a much safer way to learn drifting by just bringing the back out once in the corner, and working with that first. it gives you an idea of countersteering to regain control. I started like that in the rain. Much less chance of spinning your whole car around or mounting the kerb.

  97r33gtst-typeM said:
ok, i've seen those tutorial vids too. And it's a load of crap how everyone suddenly goes off using all these terms that the japs use, such as 'e brake' lol, like WTF? i think you mean handbrake?
Yeah that annoys me too, but E-brake is an American term, in the video they mix in the term "side brake" which I presume is a Japanese transliteration...

Well, to me powersliding has always seemed out of control. Where-as with a drift you've still got control of the car as sideways as it is.

I.e. powersliding to me is when the car is sideways, with all four wheels doing absolutely nothing in the way of forward momentum or directional changes. And that its a power slide and your about to hit a pole;)

Who knows, thats how I've always seen it. I know that you can get into slides with power to carry through corners etc, and I don't call that drift.. Alot of cars here flick the ass out coming out of a corner and say, see that drift.. Or fishy it up the road with minor angle on the car and say whoa drifted that.

Whereas its more like, wow, you glorified a chirp.. Let me see you keep that fishy going around the next two corners without killing yourself.

I see drift as a form of powersliding with the occasional need to the handbrake.

Powersliding is more brute power that sends your 'power' sliding out of a corner.

To myself Powersliding is exactly that.. 'Power' 'Sliding' Using power to create a slide, not like drift that some times uses the handbrake or a touch of the brake pedal to help hold the slide a little longer.

Essentially Drifting is powersliding to a certian extent BUT powersliding is not drifting.

If your looking out the drivers side or passenger side window to see where the f**k your going for more than a couple of seconds without spinning or overcorrecting... your drifting :P

sideways is sideways it just comes down to how long you can hold it like that... (directly proportional to the size of your balls)

  NickR33 said:
If your looking out the drivers side or passenger side window to see where the f**k your going for more than a couple of seconds without spinning or overcorrecting... your drifting :P

sideways is sideways it just comes down to how long you can hold it like that... (directly proportional to the size of your balls)

LOL! excellent. :(

Funky, this is drifting...

http://www.carmode.net/carmode/movi...06file/yv86.wmv

Justin, reason you say/see idiots drifting poorly in Skylines is because they haven't setup the car properly and the car is too heavy to start with...plus who drifts in Skylines anyway except for Nomu! Not that it can't be done just not as elegant and sustained with a lighter car and sufficent horsepower.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...