Jump to content
SAU Community

Recommended Posts

Hey guys got a staggy series 2 engine in the 32 gts4 at the moment. Was running pretty well with gt2871 turbo s15 injectors q45 afm and remapped ecu... took these all out and put it back to standard and now its having massive problems starting.

Car currently has:

Front feed plenum with larger throttle body

Rb25 neo afm

Series 1 afm (engine is series 2 but people have told me it doesnt matter)

Series 2 coil packs

stock rb25 injectors

Stock turbo

These are the onyl things that have been replaced

Its struggling to start.. have got it started a couple of times but runs like dog shit.

Plugged a power fc in .. still ran like shit and struggled to start.. obviously tuned differently but ..

Have injector pulse.. have spark..

Plugs foul up very quickly.. cleaned them numerous times..

Pull the cas out and spin it and injectors click.. not completely fluently but still click...

So given that.. im really not sure where to go from here

Any ideas would be much appreciated

if the stock ecu has been remapped to suit s15 injectors and q45

and you put the stock parts back in, it will run like a bucket of crap

likewise with the powerfc - i would expect same results

overfuelling, mega rich and just a boggy tune

my advice would be to put the PFC in and DATA INIT to factory defaults

then it should start first stop providing you have factory afm and injectors

if the stock ecu has been remapped to suit s15 injectors and q45

and you put the stock parts back in, it will run like a bucket of crap

likewise with the powerfc - i would expect same results

overfuelling, mega rich and just a boggy tune

my advice would be to put the PFC in and DATA INIT to factory defaults

then it should start first stop providing you have factory afm and injectors

or get yourself a standard s2 r33 ecu for 150 or so

well the best way is to list all the possible alternatives, then to cancel them out 1 by 1 effectively till you find out what it is. Now could it be theres not enough petrol?

Yeah heaps of fuel in the tank

Been told series 1 ecu should work but im having my doubts

an rb20det ecu was remapped.. but that has been removed and replaced by a stock series 1 ecu no remap

S1 no go with the coils you have

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...