Jump to content
SAU Community

Recommended Posts

Hey guys got a staggy series 2 engine in the 32 gts4 at the moment. Was running pretty well with gt2871 turbo s15 injectors q45 afm and remapped ecu... took these all out and put it back to standard and now its having massive problems starting.

Car currently has:

Front feed plenum with larger throttle body

Rb25 neo afm

Series 1 afm (engine is series 2 but people have told me it doesnt matter)

Series 2 coil packs

stock rb25 injectors

Stock turbo

These are the onyl things that have been replaced

Its struggling to start.. have got it started a couple of times but runs like dog shit.

Plugged a power fc in .. still ran like shit and struggled to start.. obviously tuned differently but ..

Have injector pulse.. have spark..

Plugs foul up very quickly.. cleaned them numerous times..

Pull the cas out and spin it and injectors click.. not completely fluently but still click...

So given that.. im really not sure where to go from here

Any ideas would be much appreciated

if the stock ecu has been remapped to suit s15 injectors and q45

and you put the stock parts back in, it will run like a bucket of crap

likewise with the powerfc - i would expect same results

overfuelling, mega rich and just a boggy tune

my advice would be to put the PFC in and DATA INIT to factory defaults

then it should start first stop providing you have factory afm and injectors

if the stock ecu has been remapped to suit s15 injectors and q45

and you put the stock parts back in, it will run like a bucket of crap

likewise with the powerfc - i would expect same results

overfuelling, mega rich and just a boggy tune

my advice would be to put the PFC in and DATA INIT to factory defaults

then it should start first stop providing you have factory afm and injectors

or get yourself a standard s2 r33 ecu for 150 or so

well the best way is to list all the possible alternatives, then to cancel them out 1 by 1 effectively till you find out what it is. Now could it be theres not enough petrol?

Yeah heaps of fuel in the tank

Been told series 1 ecu should work but im having my doubts

an rb20det ecu was remapped.. but that has been removed and replaced by a stock series 1 ecu no remap

S1 no go with the coils you have

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...