Jump to content
SAU Community

Recommended Posts

Hey guys got a staggy series 2 engine in the 32 gts4 at the moment. Was running pretty well with gt2871 turbo s15 injectors q45 afm and remapped ecu... took these all out and put it back to standard and now its having massive problems starting.

Car currently has:

Front feed plenum with larger throttle body

Rb25 neo afm

Series 1 afm (engine is series 2 but people have told me it doesnt matter)

Series 2 coil packs

stock rb25 injectors

Stock turbo

These are the onyl things that have been replaced

Its struggling to start.. have got it started a couple of times but runs like dog shit.

Plugged a power fc in .. still ran like shit and struggled to start.. obviously tuned differently but ..

Have injector pulse.. have spark..

Plugs foul up very quickly.. cleaned them numerous times..

Pull the cas out and spin it and injectors click.. not completely fluently but still click...

So given that.. im really not sure where to go from here

Any ideas would be much appreciated

if the stock ecu has been remapped to suit s15 injectors and q45

and you put the stock parts back in, it will run like a bucket of crap

likewise with the powerfc - i would expect same results

overfuelling, mega rich and just a boggy tune

my advice would be to put the PFC in and DATA INIT to factory defaults

then it should start first stop providing you have factory afm and injectors

if the stock ecu has been remapped to suit s15 injectors and q45

and you put the stock parts back in, it will run like a bucket of crap

likewise with the powerfc - i would expect same results

overfuelling, mega rich and just a boggy tune

my advice would be to put the PFC in and DATA INIT to factory defaults

then it should start first stop providing you have factory afm and injectors

or get yourself a standard s2 r33 ecu for 150 or so

well the best way is to list all the possible alternatives, then to cancel them out 1 by 1 effectively till you find out what it is. Now could it be theres not enough petrol?

Yeah heaps of fuel in the tank

Been told series 1 ecu should work but im having my doubts

an rb20det ecu was remapped.. but that has been removed and replaced by a stock series 1 ecu no remap

S1 no go with the coils you have

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...