Jump to content
SAU Community

Recommended Posts

Hey guys got a staggy series 2 engine in the 32 gts4 at the moment. Was running pretty well with gt2871 turbo s15 injectors q45 afm and remapped ecu... took these all out and put it back to standard and now its having massive problems starting.

Car currently has:

Front feed plenum with larger throttle body

Rb25 neo afm

Series 1 afm (engine is series 2 but people have told me it doesnt matter)

Series 2 coil packs

stock rb25 injectors

Stock turbo

These are the onyl things that have been replaced

Its struggling to start.. have got it started a couple of times but runs like dog shit.

Plugged a power fc in .. still ran like shit and struggled to start.. obviously tuned differently but ..

Have injector pulse.. have spark..

Plugs foul up very quickly.. cleaned them numerous times..

Pull the cas out and spin it and injectors click.. not completely fluently but still click...

So given that.. im really not sure where to go from here

Any ideas would be much appreciated

if the stock ecu has been remapped to suit s15 injectors and q45

and you put the stock parts back in, it will run like a bucket of crap

likewise with the powerfc - i would expect same results

overfuelling, mega rich and just a boggy tune

my advice would be to put the PFC in and DATA INIT to factory defaults

then it should start first stop providing you have factory afm and injectors

if the stock ecu has been remapped to suit s15 injectors and q45

and you put the stock parts back in, it will run like a bucket of crap

likewise with the powerfc - i would expect same results

overfuelling, mega rich and just a boggy tune

my advice would be to put the PFC in and DATA INIT to factory defaults

then it should start first stop providing you have factory afm and injectors

or get yourself a standard s2 r33 ecu for 150 or so

well the best way is to list all the possible alternatives, then to cancel them out 1 by 1 effectively till you find out what it is. Now could it be theres not enough petrol?

Yeah heaps of fuel in the tank

Been told series 1 ecu should work but im having my doubts

an rb20det ecu was remapped.. but that has been removed and replaced by a stock series 1 ecu no remap

S1 no go with the coils you have

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...