Jump to content
SAU Community

Recommended Posts

Hey guys, came across this car on the net, and thought you may be interested in having a look.

The full build up is here: http://www.rogerclarkmotorsport.com/gobstopper.asp?id=0

It's an awesome car, currently does all sorts of motorsport in the UK, inlcuding their Time Attack series.

Gobstopper Specs:

Power = 850 bhp

Weight = 1120 kgs

Intended use: street/track/hill climbs/drag strip/time attack

Body

WRC steel arches WRC front and rear bumpers

WRC carbon rear spoiler

FIA T45 multi point welded in roll cage

STi alloy bonnet with RCMS heat extraction vents and gas struts

Heated front screen

WRC non heated lightweight rear screen

Engine

2.0Litre closed deck subaru block

RCMS extreme arrow rods

RCMS 75mm steel crankshaft

RCMS omega flat top pistons (coated) compression ratio 9.5:1

V4 STi cylinder heads with WRC/RCMS O-ring head gaskets and gas rings

One piece Nimonic exhaust valves

One piece stainless inlet valves

RCMS uprated valve springs

Plasma nitrided titanium spring caps

WRC main and big end bearings

WRC R-Profile high wrap cam belt system

RCMS modified oil pump to suit R-Profile belt

WRC S10 inlet manifold

RCMS eight injector kit

RCMS 72mm throttle body

RCMS 5.5 litre alloy sump

WRC short runner exhaust manifold

Garret GT 35-40 turbo with speed sensor

K&N air filter with RCMS 100mm inlet trumpet

RCMS high flow intercooler with twin tube core

70mm stainless steel intercooler pipe work

Electronics

M800 Motec ECU with traction control,nitrous control,anti-lag

paddle shift control,and full engine management control and data login

Motec dash with data login

Defi gauges for turbo,oil,fuel pressure

Interior

FIA carbon kevlar Recaro seats

FIA Sabelt 6-point harness

Transmission

R180 STi rear axle 3.9:1 cwp and plated Modena LSD differential

GKN rally drive shafts front and rear

Torque line carbon fibre propshaft

Six speed subaru gearbox casing modified for sequential housing

Six speed Modena gear kit

Subaru 3.9:1 front cwp

RCMS sequential system

RCMS paddle shift system

Plated centre diff with 1:1 uprated output Modena gears

Plated front Modena differential

Fuel System

FIA spec 26 litre rubber/kevlar bag tank in aluminium cover

Twin Bosch fuel pumps (200 litre per pump)

-8 Goodrich fuel feed pipe

-6 Goodrich fuel return pipe

-6 fuel cooler with cooling fan on return

RCMS 8 injector distribution block

2x SX fuel regulators running at 4 bar static pressure

Suspension

WRC spec EXE-TC fully adjustable dampers

High and low speed bump + rebound adjustment

STi Rose jointed rear lateral links

STi Rose jointed rear trailing links

EXE-TC bottom rose jointed upright bushes

STi alloy front arms (polished)

STi quick-steer steering rack

Other

WRC roller bearing single piece steering column

Momo suede steering wheel

Nitrous

NX full wet system

121bs carbon bottle with heater jacket

High flow shark nozzle

Motec auto control or driver manual system

Adjustable from +35bhp to +400bhp

Clutch

RCMS spec triple plate alloy cover OS Giken clutch and flywheel

RCMS hydraulic light pressure system

Quick release dry brake fluid connection

Brakes

AP 355mm six pot front (track and road use)

AP 304mm four pot front (drag strip use)

AP 290mm four pot rear with floating discs

RCMS hydraulic carbon handbrake

-3 stainless steel goodrich pipe work and fittings

Wheels

Road/Track use 19x8 forged alloy 1 piece rims

Drag strip use 15x8 spun alloy 3 piece rims

Videos:

http://www.rogerclarkmotorsport.com/gobsto...highqality.mpeg

http://www.rogerclarkmotorsport.com/gobsto...g%20Course.mpeg

post-8405-1212016969_thumb.jpg

post-8405-1212016982_thumb.jpg

post-8405-1212016999_thumb.jpg

post-8405-1212017015_thumb.jpg

post-8405-1212017040_thumb.png

post-8405-1212017053_thumb.jpg

post-8405-1212017208_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/221396-roger-clark-sti-gobstopper/
Share on other sites

I'm in love with this car, the quality of the parts, and the workmanship is amazing. Paddle shift!

I was going to say the same thing.

The level or finish and presentation is first class. This is is how all race cars should look.

The suede on the dash is awesome...the whole car is but the interior is pretty spesh.

beautiful car and it would be awesome fun to blast around in such a well sorted piece. good to see some nice aussie gear in there. aussie gear set, aussie diffs, aussie ecu. go ostraya!

thats a Super Rexy!

it might the first wrx that has a chance of keeping up with a GTR! :thumbsup:

As far as I know this car is comparable (if not faster than) to the Zen Performance WRX also from the UK that went to Japan to compete in Revspeeds super battle at Tsukuba that ran >1second faster than the "all conquering" Hioctane racing R32 GTR :(

Wheels

Road/Track use 19x8 forged alloy 1 piece rims

Drag strip use 15x8 spun alloy 3 piece rims

the first photo on the website and the last picture in original post the car has the full carbon fibre wheels on it, and the last picture in post 1

can't remember the company over in the UK that produces them off the top of my head

Edited by Whiplash

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...