Jump to content
SAU Community

Recommended Posts

well dropped off my car at trojasn today and pauls first thoughts is that the turbo needs replacing, so what are optiosn in this situation so im not talking to them blind. os if i could get ideas, or websites to lolok at the would be great, or if someones been in the same situation

refurbish (i guess this depends on condition or current turbo)

buy a 2nd hander

buy a garret replacement

or a new one with all new fittings

Link to comment
https://www.sau.com.au/forums/topic/221717-tubo-on-its-way-out/
Share on other sites

You could rebuild it, though that is expensive and you are still stuck with a stock turbo.

You could replace it with a 2nd hand stock turbo ~$300, no guarantee that the turbo works but its cheap.

You could replace it with a Garrett unit some are bolt on.

You could replace it with a HKS GT-RS kit. Expensive but it comes with everything and is a fantastic bolt on turbo if you only want to make ~250-260kw (provided you upgrade the support systems for it).

yeah jon straight away showed me the hks turbo, look im happy with the 194rwk, but the temptation of 240 is pretty big, plus the hks comes with braided lines and new turbo bits and pieces, what sort of supporting mods would you need for 240/260????

Fuel pump, larger injectors ( nismo 555cc / stock S15 480cc ), after market ECU. The hks kit comes with all the new oil and water lines, gaskets and such. Everything else should be fine (assuming you have FMIC, ~3" turbo back exhaust, boost controller)

Edit. Forgot about the clutch. The stock one wont like that much power :happy:

Edited by TiTAN

john probably would have told you bout the KKR turbos. john put the KKR430 on mine and im very happy with it, it feels very responsive and cheap i made 252kw with it. a friend of mine had john put on the KKR 480 and made 300 for not much more but with standard engine i stuck with the 430

i have aftermarket clutch, ecu and the other parts not sure of pump and injectors. whats the difference with kkr and gtrs hks turbos, and ben if i cold get a look at one point that would be great,

mang if you dont mind how much the 430 set u back installed, im only after 200rwkw but wouldnt mind going up to 240rwkw, lol, i like even numbers

Hks made by Garrett to Hks specs, so made in USA, ball bearing turbo, say $3000 for a kit.

KKR made by KKR in Korea, bush turbo, say $800 plus water/oil lines $250.

Give or take a few $$.

If your poor, and don't intend keeping the car - or inversely the turbo - forever, go the KKR.

If you can afford it go the HKS, its like comparing an excel to a corolla, you get what you pay for.

HPI had a write up on the KKR a while ago, issue 84.

hmmm, more possibilities this is good, why did you take it off, at what ks???

alex

I have a stock S1 turbo you can take for $200. It doesnt have shaft play (or very little that goes with oil pressure) and only did 15psi a few times, but ran near stock most of its life.

Plus you learnt u want a new clutch now (or at least adjustment on yours) hehe

If a S1 turbo works on your car, datto's sounds like the best option. I was also thinking Alex, if you were lookin at mine for a rebuild - might as well rebuild your own hehe

YGPM = you got private message!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...