Jump to content
SAU Community

Recommended Posts

well dropped off my car at trojasn today and pauls first thoughts is that the turbo needs replacing, so what are optiosn in this situation so im not talking to them blind. os if i could get ideas, or websites to lolok at the would be great, or if someones been in the same situation

refurbish (i guess this depends on condition or current turbo)

buy a 2nd hander

buy a garret replacement

or a new one with all new fittings

Link to comment
https://www.sau.com.au/forums/topic/221717-tubo-on-its-way-out/
Share on other sites

You could rebuild it, though that is expensive and you are still stuck with a stock turbo.

You could replace it with a 2nd hand stock turbo ~$300, no guarantee that the turbo works but its cheap.

You could replace it with a Garrett unit some are bolt on.

You could replace it with a HKS GT-RS kit. Expensive but it comes with everything and is a fantastic bolt on turbo if you only want to make ~250-260kw (provided you upgrade the support systems for it).

yeah jon straight away showed me the hks turbo, look im happy with the 194rwk, but the temptation of 240 is pretty big, plus the hks comes with braided lines and new turbo bits and pieces, what sort of supporting mods would you need for 240/260????

Fuel pump, larger injectors ( nismo 555cc / stock S15 480cc ), after market ECU. The hks kit comes with all the new oil and water lines, gaskets and such. Everything else should be fine (assuming you have FMIC, ~3" turbo back exhaust, boost controller)

Edit. Forgot about the clutch. The stock one wont like that much power :happy:

Edited by TiTAN

john probably would have told you bout the KKR turbos. john put the KKR430 on mine and im very happy with it, it feels very responsive and cheap i made 252kw with it. a friend of mine had john put on the KKR 480 and made 300 for not much more but with standard engine i stuck with the 430

i have aftermarket clutch, ecu and the other parts not sure of pump and injectors. whats the difference with kkr and gtrs hks turbos, and ben if i cold get a look at one point that would be great,

mang if you dont mind how much the 430 set u back installed, im only after 200rwkw but wouldnt mind going up to 240rwkw, lol, i like even numbers

Hks made by Garrett to Hks specs, so made in USA, ball bearing turbo, say $3000 for a kit.

KKR made by KKR in Korea, bush turbo, say $800 plus water/oil lines $250.

Give or take a few $$.

If your poor, and don't intend keeping the car - or inversely the turbo - forever, go the KKR.

If you can afford it go the HKS, its like comparing an excel to a corolla, you get what you pay for.

HPI had a write up on the KKR a while ago, issue 84.

hmmm, more possibilities this is good, why did you take it off, at what ks???

alex

I have a stock S1 turbo you can take for $200. It doesnt have shaft play (or very little that goes with oil pressure) and only did 15psi a few times, but ran near stock most of its life.

Plus you learnt u want a new clutch now (or at least adjustment on yours) hehe

If a S1 turbo works on your car, datto's sounds like the best option. I was also thinking Alex, if you were lookin at mine for a rebuild - might as well rebuild your own hehe

YGPM = you got private message!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...