Jump to content
SAU Community

Recommended Posts

Yeah thats a good idea Dohmar, But Oosh im not sure what you meant by your comment.

He's referring to the gearbox gear ratios. The OS Giken kit has a different ratio. I'm not sure whether it revs out easier or not, but I'm suspecting its for drag racers? The OS Giken stuff is one of a couple of rebuild kits. Either that or you buy a brand new OEM box for $3200... or find the bits and pieces you need as components and assemble it as new...

-D

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

It's a taller gear, it'd be like taking off from the lights half way between 1st and 2nd gear, more clutch slipping so not good in stop start driving but a more usable gear in low-speed corner on the race track where a road 1st would be way too low.

Shadex you still haven't mentioned what you intend to do with this car, is it a tough streeter, dedicated drag or track weapon?

Id rather just by a complete box -_- The OEM ones come built? But are they any good? O_O

As good as brand new. In fact, I believe they sell the Series 3 R33 box for that same price;

http://justjap.com/store/home.php?cat=254

Check that shizzl out... Genuine Nissan Gearbox - Nissan Skyline BCNR33 Genuine Nissan Replacement Gearbox - Nissan Skyline R33 GTR (Series 3)

$3200

Which will be fine for a certain range... I think if ur gonna do over 500hp then you *might* be looking for a rebuild kit (I really dont know jack about power levels for boxes or rebuilds, perhaps someone out there does and can let us know when the time would be to consider a rebuild, cause I'd be interested).

I know I'm aiming for 400hp or so and the GTR box will easily cope with that, so I'm not gonna bother with a hardcore rebuild. Maybe if I get a 2nd job pimping and have a spare $100k to lash out on rebuilding a '32 racecar for targa tassie >:(

ahh well i can dream, cant i?

-D

Yea dreamings good lol, But yeah i have seen the brand new box before, i thought you meant a after market stronger box lol.

Oosh, eventually i would like around the 350+ rwkw range, But saying that im not going to go out and do that by the end of the year. But in the next few years i would like to have built a mean street car. Thats the plan anyhow.

Yea dreamings good lol, But yeah i have seen the brand new box before, i thought you meant a after market stronger box lol.

Oosh, eventually i would like around the 350+ rwkw range, But saying that im not going to go out and do that by the end of the year. But in the next few years i would like to have built a mean street car. Thats the plan anyhow.

thats under 500hp, and I know plenty of people who are running that sort of power with stock boxes and theyre not having any problems. If you can get yourself a good 2nd hand GTR box then you'll be laughing. No rebuilt boxes are necessary for that sort of power provided you're not going to abuse it, or race hard..

If you can afford the 33 GTR series 3 box then get that and fit it. Otherwise look out for a good 2nd hand one of those :ermm:

-D

Not sure what you men by that. Do you mean Rebuild box's wont take being raced / abused but GTR ones will? Is that what your getting at?

No.

A rebuilt GTR box will have more strength and better ratios for racing or dragging, depending on how you build it. (As in, if you replace the gear sets and put in stronger bearings/synchros) But if you're going to have a maximum of 500 horsepower then I personally don't think it would be necessary to rebuild a GTR box (for street use), as a stock GTR box will suffice. If you get a GTS4 or GTS-T box I don't know what sort of power levels they can cope with by default. This is why oosh wants to know what exactly you're going to use it for. A gearbox for the street is not the same as a dragging box or a racing box, or a drifting box. Different boxes for different jobs.

-D

No.

A rebuilt GTR box will have more strength and better ratios for racing or dragging, depending on how you build it. (As in, if you replace the gear sets and put in stronger bearings/synchros) But if you're going to have a maximum of 500 horsepower then I personally don't think it would be necessary to rebuild a GTR box (for street use), as a stock GTR box will suffice. If you get a GTS4 or GTS-T box I don't know what sort of power levels they can cope with by default. This is why oosh wants to know what exactly you're going to use it for. A gearbox for the street is not the same as a dragging box or a racing box, or a drifting box. Different boxes for different jobs.

-D

Am I glad I've got a Gehtrag!!!!!!

No.

A rebuilt GTR box will have more strength and better ratios for racing or dragging, depending on how you build it. (As in, if you replace the gear sets and put in stronger bearings/synchros) But if you're going to have a maximum of 500 horsepower then I personally don't think it would be necessary to rebuild a GTR box (for street use), as a stock GTR box will suffice. If you get a GTS4 or GTS-T box I don't know what sort of power levels they can cope with by default. This is why oosh wants to know what exactly you're going to use it for. A gearbox for the street is not the same as a dragging box or a racing box, or a drifting box. Different boxes for different jobs.

-D

I see. Well manly it will be just a street box. But what im getting at is i want it to be out to cope with abit of pressure/stress.

I see. Well manly it will be just a street box. But what im getting at is i want it to be out to cope with abit of pressure/stress.

Thats a hard one. A std GTR box is tough to begin with, but no box is indestructible. It all depends on how you drive it, what sorta power yr engine puts out, whether or not the clutch is going to help or hinder the drivetrain. For my 2c, I'd just get a 2nd hand GTR box in good condition. If it dies, get your old one reconditioned. Sadly, gearboxes are labour intensive and so will never be cheap to get done, but rather $2000 than a $7000 box if you're never going to need that much...

-D

Yea but just cause somethings new doesn't mean that its going to stay strong lol, Id rather spend the extra and have something that im not going to have to replace a year so down the track.

I've gotten 18 years out of my current box. Its the same one that came with the car when it was released. Only now do I have to replace it, and even then I'm just taking the cheapest option instead of replacing the synchros. Seriously, unless you're going to go over 500hp, stick with the stock box. Nothing, even a $7000 rebuilt box, is indestructible.

-D

Stick with stock, but just don't put a stoopid hard clutch in and your gearbox will thank you, think of your clutch like a "fuse".

Remember it's far cheaper and easier to replace a burnt-out clutch than a lunched gearbox.

Stick with stock, but just don't put a stoopid hard clutch in and your gearbox will thank you, think of your clutch like a "fuse".

Remember it's far cheaper and easier to replace a burnt-out clutch than a lunched gearbox.

great analogy :P

1. its Getrag

2. i'm led to believe there is no difference between RB25 gearbox and R33 GTR gearbox

next

lol. you're lead wrong imho. 33 gtr gearbox is an upgraded 32 gtr gbox, meaning it has the same xfer case but stronger input shaftand if its an s3 33 gtr box it'll have tougher synchros. the 25 box is tough but lacks an xfer case (and possibly other stuff, unless theres a rb25 4wd variant? aside from stagea, and even then I doubt they'd be the same as the GTS-4 has different ratios to the GTR so I see no reason why other boxes would be stronger...)...

Caveat - I know sfa about boxes. I could be wrong :)

-D

well shaun at boost worx told me they were basically the same possibly different ratios for some of the gears i dont know

as for

that statement is clearly wrong as R33 cant pull the fuse due to pre-load on the transfer case

33 gtr gearbox is an upgraded 32 gtr gbox, meaning it has the same xfer case but stronger input shaft and if its an s3 33 gtr box it'll have tougher synchros.

you do realise they bolt on and off

the 25 box is tough but lacks an xfer case

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...