Jump to content
SAU Community

Recommended Posts

hey, only one of my exhaust tips is working so im wondering if my muffler is blocked/causing some of my issues. so yer anyone in ipswich with a series 2 got a stock exhaust lying around,can i borrow the rear muffler.

thank you

Link to comment
https://www.sau.com.au/forums/topic/223018-need-to-borrow-an-exhaust/
Share on other sites

hey, only one of my exhaust tips is working so im wondering if my muffler is blocked/causing some of my issues. so yer anyone in ipswich with a series 2 got a stock exhaust lying around,can i borrow the rear muffler.

thank you

Hi

I have a rear mufler off a s1 you could borrow if that is of aney help

I'm in Ipswich to

Cheers

Phil

joe26f you may be right, thats exactly what mine does, but if thats the case i think nissan are stupid for doing it, how has everyone been going about aftermarket exhausts, and are there any major performance differences??

hey, only one of my exhaust tips is working so im wondering if my muffler is blocked/causing some of my issues. so yer anyone in ipswich with a series 2 got a stock exhaust lying around,can i borrow the rear muffler.

thank you

I had a similar issue with my series 2; thought that only the passenger side pipe was flowing because that was the one where the vapor cloud came from when it was cold. Turned out though that that's just the path of least resistance, if you will, and just more gas comes out there. I verified this with another series 2 muffler (thanks Oxford :happy:) when I tried blasting some compressed air through; I could feel more coming out the passenger side pipe than the driver's side. I think it might have to do with the way the baffles work.

well the way i checked is i blocked off the passenger side one and still nothing comes out the drivers side one, thats why i considered blocked. but after some thought, is it possible that ova a certain pressure it will actually start working to increase flow but still be quite at low speed due to not as much flow??

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...