Jump to content
SAU Community

Recommended Posts

made me cross over to the dark 2j side :)

pshh dark side my ass... nothing good ever comes from a 2j... what happened to all those fun times disassembling nissan motors after they start rattling and constantly fixing lil shit and getting no where.

that's where the shits at! never seen a toyota motor give its owner such wonderfull lengths of bonding time.

Edited by SkyHi_33
pshh dark side my ass... nothing good ever comes from a 2j... what happened to all those fun times disassembling nissan motors after they start rattling and constantly fixing lil shit and getting no where.

that's where the shits at! never seen a toyota motor give its owner such wonderfull lengths of bonding time.

plan is to crack 300rwkw on a stock bottom end...then push 400 which will result in plenty of bonding time :)

plan is to crack 300rwkw on a stock bottom end...then push 400 which will result in plenty of bonding time :)

haha it will take it... if an rb can take 300+ on a stock bottom end you should be perfectly fine.

and sice this is a photo thread, my new fav as of last night hehe

r331.jpg

haha it will take it... if an rb can take 300+ on a stock bottom end you should be perfectly fine.

and sice this is a photo thread, my new fav as of last night hehe

r331.jpg

Nice new guards! Whens the paint work gettin done ?

Oh and i ope it lasts...with what i have planned for it lol.

haha its getting rubbed down and primed end of next week before all jap day, gonna be in the show slammed as low as it will go. Getting painted sometime in March when I get around to it.

20022010112.jpg

this would be one of my favourite ones this week....

it means Marv is coming back out into the world after a 3 year 2 moth, 17 day and 11 hour lay-up in the shed...

woot woot!

  • 2 weeks later...
IMG_2301.jpg

IMG_2305.jpg

04.jpg

IMG_2689.jpg

just a few of my fav of mine...

but as she is now im not so proud, well doesnt look too hot as im in the middle of doing a few bits but here it is as she sits now :)

01-1.jpg

i know im not from south aus or anywhere in aus for that matter but i stayed there for 6 months a while back so though id throw them up :D

wow been a long time since i was on here, well above is how my car was before, think i better update it, seen as its slightly different now :D

firstly how she started out when i first got it.... :wallbash)

892643_20080117030150_1.jpg

:hmmm)

best get going at it then this is the lady today....

IMG_0432.jpg

IMG_0466.jpg

IMG_0445.jpg

IMG_0486.jpg

IMG_0473.jpg

IMG_0463.jpg

IMG_0420.jpg

let me know what you think then.

Because of the side skirts coming out as much as they do, I really think to finish it off stick a 10mm spacer behind the rear wheels and it will complete the whole overall look of the car :thumbsup:

^ that is very nice mate!

thanks

Because of the side skirts coming out as much as they do, I really think to finish it off stick a 10mm spacer behind the rear wheels and it will complete the whole overall look of the car :cheers:

thanks, yeah ive been thinking the same about the spacer, but i need a little arch work for the wheels to sit right as the standard arch was left when the 400r were put on, so they will rub like fook if i just stick a spacer on..... :thumbsup:

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...