Jump to content
SAU Community

Recommended Posts

made me cross over to the dark 2j side :)

pshh dark side my ass... nothing good ever comes from a 2j... what happened to all those fun times disassembling nissan motors after they start rattling and constantly fixing lil shit and getting no where.

that's where the shits at! never seen a toyota motor give its owner such wonderfull lengths of bonding time.

Edited by SkyHi_33
pshh dark side my ass... nothing good ever comes from a 2j... what happened to all those fun times disassembling nissan motors after they start rattling and constantly fixing lil shit and getting no where.

that's where the shits at! never seen a toyota motor give its owner such wonderfull lengths of bonding time.

plan is to crack 300rwkw on a stock bottom end...then push 400 which will result in plenty of bonding time :)

plan is to crack 300rwkw on a stock bottom end...then push 400 which will result in plenty of bonding time :)

haha it will take it... if an rb can take 300+ on a stock bottom end you should be perfectly fine.

and sice this is a photo thread, my new fav as of last night hehe

r331.jpg

haha it will take it... if an rb can take 300+ on a stock bottom end you should be perfectly fine.

and sice this is a photo thread, my new fav as of last night hehe

r331.jpg

Nice new guards! Whens the paint work gettin done ?

Oh and i ope it lasts...with what i have planned for it lol.

haha its getting rubbed down and primed end of next week before all jap day, gonna be in the show slammed as low as it will go. Getting painted sometime in March when I get around to it.

20022010112.jpg

this would be one of my favourite ones this week....

it means Marv is coming back out into the world after a 3 year 2 moth, 17 day and 11 hour lay-up in the shed...

woot woot!

  • 2 weeks later...
IMG_2301.jpg

IMG_2305.jpg

04.jpg

IMG_2689.jpg

just a few of my fav of mine...

but as she is now im not so proud, well doesnt look too hot as im in the middle of doing a few bits but here it is as she sits now :)

01-1.jpg

i know im not from south aus or anywhere in aus for that matter but i stayed there for 6 months a while back so though id throw them up :D

wow been a long time since i was on here, well above is how my car was before, think i better update it, seen as its slightly different now :D

firstly how she started out when i first got it.... :wallbash)

892643_20080117030150_1.jpg

:hmmm)

best get going at it then this is the lady today....

IMG_0432.jpg

IMG_0466.jpg

IMG_0445.jpg

IMG_0486.jpg

IMG_0473.jpg

IMG_0463.jpg

IMG_0420.jpg

let me know what you think then.

Because of the side skirts coming out as much as they do, I really think to finish it off stick a 10mm spacer behind the rear wheels and it will complete the whole overall look of the car :thumbsup:

^ that is very nice mate!

thanks

Because of the side skirts coming out as much as they do, I really think to finish it off stick a 10mm spacer behind the rear wheels and it will complete the whole overall look of the car :cheers:

thanks, yeah ive been thinking the same about the spacer, but i need a little arch work for the wheels to sit right as the standard arch was left when the 400r were put on, so they will rub like fook if i just stick a spacer on..... :thumbsup:

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • How many of you guys run the synchro os giken set and at what power? Do you then also use the billet plate?  How is it launching with it, any dragy times from 0-60? 60ft?
    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
×
×
  • Create New...