Jump to content
SAU Community

Recommended Posts

Its more the point of why buy a crap so called 'synthetic' grpIII oil when for the same price u can get another brand that is based on the 'better' grpiv.

I run the Motul 5w40 for $59.

Beats the crap out of the Castrol 5w30 and Shell 5w40 of which are grp3 based and strangely my motor appears to use a little oil each change at 5k. The Motul 5w40 or Mobil 5w50 it doesn't use a drop. Interestingly they are both grpiv oils.

The fact that he/she is changing at 5K intervals does negate part of the problem, assuming he doesn't change his oil filter every 5K with it, but there are better oils out there.

However, I just disagree with the "ask your local autobarn for there recommendation" when we have a huge discussion and a summary of the oils in the first post.

There's been plenty of effort to guide people on what oils to buy, I'm not an expert but at least I've researched my opinion.

I run 98 octane fuel only in my Skyline, its what its tuned for.

I just dont see any concrete evidence about which oil is better than another apart from these used oil tests (no I cbf sifting through 48 pages to look for them either), fyi I did read this thread and some of the associated links before I selected the oil I was going to use, even Mobil 1 oil is around 80 bucks a bottle for 0w/40, and I use more than 5 litres of oil in a service (due to the bigger sump).

Not all salespeople are clueless morons either. I know of 2 guys who work at different parts franchise shops here who are Skyline owners and very knowledgeable.

The main reasons I ended up going with the Castrol were the fact that several mates use it in their Skylines which do get driven hard regularly and over a long period, and my parents have always used it in their RB30 Patrol which has just gone over 400 000km and still running fine, which suggests to me that it cant be as bad as some of you are making out.

The one and only time I've seen oil make a performance difference was when a local performance mechanic gave me a demonstration of an LS1 running Pennzoil 5w30 on a dyno, which then had the oil immediately changed to Martini 0w40 IIRC for a 3rwkw gain. Therefore if I were to try anything else it would be that first.

Btw, what is wrong with changing the oil filter at 5000km?

Technically, for 5W30, Motul X-max(5W30) has a closer viscosity than X-cess(5W40). There are also Mobil1 5W30 silver bottle silver cap that I have seen around. So there are heaps of choices. Not just Castrol....

I see no advantage in using higher quality based stock oil if a person is doing 3 summer months, 5000km OCI driving in grandma style....

So there is no good or bad oil, just depends on your application, OCI, driving style, weather conditions....

I see no advantage in using higher quality based stock oil if a person is doing 3 summer months, 5000km OCI driving in grandma style....

So there is no good or bad oil, just depends on your application, OCI, driving style, weather conditions....

The average skyline isn't driven grandma style. The grpiii based oils I have tried all have been consumed slightly by the motor. The grpiv oils however not a drop.

I am just exaggerating, I am sure you understand what I am trying to say.

In terms of oil consumption, that's a perfect example. If you find out that with the conditions of your engine and your driving style, Edge Sport did seem to be burnt off more than X-cess. That X-cess is perfect for you.

P.S. personally, I think oil consumption have more to do with viscosity VS oil pressure and add packs than based stock oil.

I can agree with cubes, in my mildly tuned r34 the motul xcess 8100 5-40 has really improved the way the car runs.. It doesnt burn almost any oil, in my last 3 changes. However i have seen a drop of oil leak say every week.. Wondering if a move to a 10w-40 would help the slight leak..

However all in all the xcess 8100 has really tested itself- i find it stays golden till about 4000kms and then starts to slowly go darker so by 5000km it looks dark. Great oil for the money :D

i'm going to try the martini oil then the motul just to satisfy myself to see if there is any difference compared to the castrol.

Now can anyone shed any light on whether Redline Shockproof Lightweight is really any good for going into a Stagea manual box with a noisy 4th syncro, or am I better off just getting any synthetic 80w90?

...doesnt burn almost any oil, in my last 3 changes. However i have seen a drop of oil leak say every week.. Wondering if a move to a 10w-40 would help the slight leak..

If it is just a drop every week, I would not worry about it. You could try to trace it so you know exactly where it is leaking from. Probably just some bolts and nuts not tight enough.

In terms of oil consumption, that's a perfect example. If you find out that with the conditions of your engine and your driving style, Edge Sport did seem to be burnt off more than X-cess. That X-cess is perfect for you.

P.S. personally, I think oil consumption have more to do with viscosity VS oil pressure and add packs than based stock oil.

The RB30 is a forklift motor so that probably explains a bit. :blink:

I did not split the oil filter open with the castrol 5w30 but with the shell 5w40 i found little lumps of what looked like grease.

I then ran Motul.. no sludge in the filter.

I switched between oils a few times. Everytime the shell stuff deposited sludgy lumps in to the filter.

Maybe thats where the 5w40 Shell was burning/sludging off too :D

There is sludge and vanish build up in the valvetrain area and then there is sludge like material clogging the oil filter. I believe they are different, just think about the temperature different between these two areas.....

Then there should not be a relation between burning (oil consumption) and sludging..

Burning will likely leave carbon deposit in and around components of the chamber...

Sludging are more due to high heat and baked-dry up oil....

Don't know may be someone who have more experience can chip in.....

Definitely. I was a little misleading stating consumed when in fact it was being caught in the filter as slight sludge.

The motor has been rebuilt, always had regular oil changes. I can't comment on the bottom end but the top end and cam covers are super clean inside.

Hey guys new to SAU and have just brought a 93 r32 gtst with 121xxx km's which is stock standard.

Im wanting to do oil changes for engine, gearbox and diff. After reading the post think i've decided on motul 300v but still not 100% sure for the engine but have no idea on gearbox or diff oils? also how much oil does engine, gearbox and diff hold? Prices and avalibilty isn't a problem as i work at the local repco store but would rather take advise from you guys/girls because repco only know holden/ford best lol.

thanks.

^ rb25 takles around 3.7-3.8 L of engine oil.

diff is around 2L

and gearbox is around 2.2L

does anyone know whats a good & recommended fully synthetic oil for a neo rb25de ?

cheers

my 34 takes 5 and a bit litres of engine oil, not sure where you're getting 3.7 from?? :rofl:

does anyone know whats a good & recommended fully synthetic oil for a neo rb25de ? have you read anything in here??

my rb26 has over a 100k on the dail whats a recomended oil, sumthin with a lil more thickness to it???

No, as per previous discussion in the thread you do not need to buy thicker oil as the engine gets older.

apprently 10w-40/15w-40 is recommended for RB's?

narrowing it down to these 2..

Penrite Sin oil 15 15w-40

elf competition GT 10w-40

currently using mobil 1 syn-s 10w-40 and afaik isn't available anymore & has been replaced with another name, mobil 2000 or something.

gonna change to fully synthetic to either one of the above mentioned ones.

car is due for a change in a months time so see how it goes then.

ive read that with the full synthetic oils, they still stay the gold colour after 4000km.

with the current oil im using, it starts to change colour after 2500~km, im guessing the oil im using isn't that good?

any opinions with the 2 oils ive chosen ?

wheres the cheapeast place in syd to get either of the 2?

cheers

Edited by dori32

hey guys....what would be the best oil for a noisy rb manual gear box.. i know ive ogtta get it rebuilt soon.... but gotta hold off until i have the coin... is there any oils ( i think thicker is better ) to quiet it down a lil?? cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...