Jump to content
SAU Community

Haltech R35 Gtr At Syd Auto Salon

jeff

By jeff,
in R35 GTR

 Share

Recommended Posts

TaKz Proficient

TaKz

Posted
Posted

yep i was there today saw the gtr go on the dyno!

although there seem to be alot of problems on the dyno the r35 wouldnt stay in gear to complete the runs took about 4-5 goes before finalli producing the 366kw atw

also saw the sau stand next to the dyno!

and i just read yesterday about the r32 gtr that beer baron was building with the crate motor! i saw it and read that piece of paper that said 2007 crate motor and i was like oic thats the one i read about!

jonn Proficient

jonn

Posted
Posted (edited)

I would hazard a guess that the announcer doesn't know what he's talking about.

There is another thread floating around about the Haltech R35 that was producing 355kw @ 15psi during testing of the ecu at Gas Motorsport. The std boost is 10psi so.......

And this graph from the Haltech website,

2j30du0.jpg

Edited by jonn
Beer Baron Grand Master

Beer Baron

Posted
Posted

It is super impressive how much power they have gained with just tuning and boost increase. what's just as impressive is how quick it is on road/strip/circuit to begin with considering it's packing "only" 290awkw from factory. Who would think a car that weighs so much, and has 20inch rims with road rubber, and packs under 300awkw would be such a super car beater. It just goes to show that torque, and response and how the power is delivered is so much more than just a peak number. and it shows how good the chassis and gearbox is. I have driven the standard car and it blows my mind, with 60awkw more it would just be off the planet! :D

m3gtr Grand Master

m3gtr

Posted
Posted
It is super impressive how much power they have gained with just tuning and boost increase. what's just as impressive is how quick it is on road/strip/circuit to begin with considering it's packing "only" 290awkw from factory. Who would think a car that weighs so much, and has 20inch rims with road rubber, and packs under 300awkw would be such a super car beater. It just goes to show that torque, and response and how the power is delivered is so much more than just a peak number. and it shows how good the chassis and gearbox is. I have driven the standard car and it blows my mind, with 60awkw more it would just be off the planet! :laugh:

when did you end up getting behind the wheel anyways richo?

Giants car was it?

DRD-00F Grand Master

DRD-00F

Posted
Posted

hehehe, if you had just panned to the right at any time, you would have seen me sitting my lazy ass on the floor inside the cage :laugh:

yep i was there today saw the gtr go on the dyno!

although there seem to be alot of problems on the dyno the r35 wouldnt stay in gear to complete the runs took about 4-5 goes before finalli producing the 366kw atw

also saw the sau stand next to the dyno!

and i just read yesterday about the r32 gtr that beer baron was building with the crate motor! i saw it and read that piece of paper that said 2007 crate motor and i was like oic thats the one i read about!

Why doesn't anyone come say hi?! :laugh:

The deal with that was that when the operator put the pedal down, it was shifting it down a gear... dunno why...

I would hazard a guess that the announcer doesn't know what he's talking about.

There is another thread floating around about the Haltech R35 that was producing 355kw @ 15psi during testing of the ecu at Gas Motorsport. The std boost is 10psi so.......

And this graph from the Haltech website,

The announcer doesn't really know what he's talking about ALL the time :laugh: but so many cars go by, who can blame him...

But one thing that was mentioned was that an aftermarket exhaust system they tried only netted them a gain of a few kw... i thought it was hard to believe with there being cats right in the dumps, but maybe you really need to push some psi through there before they start restricting too much... iono :P

scathing Grand Master

scathing

Posted
Posted
but seeing the guys at GAS and Haltech were there in and around the car with the announcer during the dyno run, they wouldve told the guy the info he needed to blurb out

Maybe they did, but like others here they mistook "standard everything" as being the car completely untouched, rather than just standard hardware. Its a bit too late to correct the guy after he's said it.

There's already been a bit of news about the Haltech R35 GT-R, and their ECU does modify boost as well as the timing (and possibly fuelling).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Wheel Sizes & Offsets For Skylines

      By The Bogan · Posted

      The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • GTSBoy
      R34 Handbrake light saying ON and intermittently flashing

      By GTSBoy · Posted

      Does the scanner do all the CUs in the car, or only the ECU?
    • albyz34gt
      R34 N/a And R34 Turbo (gtt) Transmission.. Uh, Problem.

      By albyz34gt · Posted

      @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • RB25inside
      R34 Handbrake light saying ON and intermittently flashing

      By RB25inside · Posted

      Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...