Jump to content
SAU Community

Recommended Posts

On my 33 GTS25t I've got a set of White Enkei's in 17x9JJ38 (Rear) and 17x8JJ38 (Front) and they fill almost perfectly! My car is pretty low though too.

I think to fill it just a little better, I'd go half a size up on both the front and the rear, but I think the back would probably need flaring if that was the case. :D

post-37465-1214136719_thumb.jpgpost-37465-1214136693_thumb.jpg

On my 33 GTS25t I've got a set of White Enkei's in 17x9JJ38 (Rear) and 17x8JJ38 (Front) and they fill almost perfectly! My car is pretty low though too.

I think to fill it just a little better, I'd go half a size up on both the front and the rear, but I think the back would probably need flaring if that was the case. :)

post-37465-1214136719_thumb.jpgpost-37465-1214136693_thumb.jpg

Nice Rims, Thanks for the suggestion.

Looks like not many people have wide wheels on their R33's

17x8 and 17x9 (gtr offset and size) fit your R33 perfectly

but wouldnt those sizes be illegal? on the RTA website it says you can go 1" wider and 2" bigger from stock. So the R33 GTST wheels are stock 16x6.5? meaning legally you can only go 18x7.5?

17x8 and 17x9 (gtr offset and size) fit your R33 perfectly

but wouldnt those sizes be illegal? on the RTA website it says you can go 1" wider and 2" bigger from stock. So the R33 GTST wheels are stock 16x6.5? meaning legally you can only go 18x7.5?

I think the wheel restictions for S.A. are that the diameter cant be greater than 15mm from the largest tyresize listed on the tyre placard and that the offset of the rim does not vary by more than 13mm from the original rim.

You want the "JDM look" but you don't want to flare the guards? To fit some decent wheels you'll need to flare the rears at least a little.

Don't be weak, if your going 17" go 17x9" +17 front and rear. Will fit with ease with stretched tyres and rolled gaurds and a light flare on the rear.

dude if u want the jdm style get 18's but if ya bit tight go with 17's!

in my opinon 18's are the best size for most imports they just suit the car more! you just dont wanna go over board with some 20's!

remember guys it's just my opinon lol

  • 4 months later...

93 r33 GTS-T i have some enkies 18x9JJ +22 Offset got some 225 in front and 245 rear. Perfect fitement and look but the rear have a few fender scuffs on the rubber !

im looking to sell those rims and got with Rota p45R, either 17x9 +30 or 18x9 +20 any one using this setup ?!

Im looking to find out what is the JJ stand for ?!?

post-52465-1227290325_thumb.jpg

On my 33 GTS25t I've got a set of White Enkei's in 17x9JJ38 (Rear) and 17x8JJ38 (Front) and they fill almost perfectly! My car is pretty low though too.

I think to fill it just a little better, I'd go half a size up on both the front and the rear, but I think the back would probably need flaring if that was the case. :)

post-37465-1214136719_thumb.jpgpost-37465-1214136693_thumb.jpg

Mate, what suspension setup do you have? That is EXACTLY the ride height I want to have on my 33. Does that clear the legal height limits? Looks fantastic. Well done.

define "jdm" look.

i was running -6 rear and -4 front 17x9 with 215 tires for awhile. got sick of pizza cutter tires, now im +10 17x9 with a 255 tire, all 4 fenders rolled.

youre not going to get the "jdm" look without rolling your fenders. people here do it for 40 bucks a fender with the rolling tool and a heat gun

Hey guys,

I found this googeling around and you can compare the stats of the new wheels you want to put on with the ones you have atm and it tells you how many mm of clearance is taken or given

http://www.1010tires.com/WheelOffsetCalculator.asp

Enjoy !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...