Jump to content
SAU Community

Recommended Posts

Will do cheaper for cash on pickup - Parts are in Brisbane, Sunnybank

Mines modified Computer for R33 gts-t rb25det series 1 Boostup .09, Exhaust, Pod - $440

HKS EVCIII Boost Controller $220

Dephi Link Boost guage (White Face 60) with Defi link Controller 1 & Boost sensor $200

Series II R33 interior - Includes seats, Doortrims, Rear 1/4 Trims $350

Rb25det power fc. No hand controller. Current setting for Boostup 1.0, Exhaust, Pod $1000

Apexi drift style cat back exhaust. Quite Loud. 1 Piece so pickup only $350

New Oilcooler with Universal Adapter and braided Hoses $250

R33 SL Bride Drivers Side Rail - Bottom Mount $150

R33 GTS-t rear Tein HA coilovers in very good condition. Hight and damper with helpersprings $400

Rb25det Rb20det 3" front / dump pipe $150

2 x 16"x6.5" R32 GTS-T rims with worn tyres $120

4 x 17x7.5"? R34 Gtt Rims. Lots of scrapes. Came off crashed car so dont know condition (I have used 2 and they where fine but other 2 had flat tyres and have not tested them for balance) . No Caps and No Tyres $220

4 x 17.7.5"? R34 Gtt rims in good condition. 1 has some gutter rash but rest are good $550 - Includes Caps - No Tyres $330 or $550 with 80%+ Nankang tyres

4 x S15 16" Wheels - 2 New tyres, 1 40% 1 Worn Rims good $450

AFM - Green Sticker (2 Available)- Suit Rb20 & Rb25 series 1 - Good upgrade for Rb26dett $120 each

AFM - Pink Sticker - Suit SeriesII Rb25 Motor $120

R33 Under Bonnet Big Fuse Box with Attached Loom $50

R33 Pedals - Clutch / Brake/ Accel $150

R33 ABS Unit $100

R33 Brake Master Cylinder and Resovior $100

R33 Bonnet Release $40

R33 rb25det std blowoff valve and pipe $50

R33 rb25det gts-t fuel pump $40

R33 rb25det Series II Coil Packs $150 the lot or $30 Each

R33 rb25det series II coil harness in good condition $40

R33 Rb25det Series I Coil Packs $30 Each

R33 Passanger Door - Has some paint Scrape $100

R33 Passanger side mirror $50

R33 Passanger side window glass $50

R33 passanger side window regulator $100

R33 Steering Column with switches, Steering Wheel is in good cond but airbag deployed $100

R33 Front crossmember with steering rack and fluid resovior + hubs. 1 Rack end is bent $50 (Pickup)

R33 Overflow Bottle - $40

R33 Std Radiator - $100

R33 Washer Bottle - $80

R33 Std caster rods - Good bushes - $50 Pair

I dont have any other r33 parts.

post-47634-1214328712_thumb.jpg

post-47634-1214328724_thumb.jpg

post-47634-1214328741_thumb.jpg

Edited by Brokenz

I wont takes the caps off this set but I have 2 spare which I will do for $50 including postage or $35 Pickup

willing to separate R34 center caps for $50? PM me if so...

I will do the powerfc for $900 pickup. It does not need a special loom like Emanage etc. You just unplug you std computer and plug the powerfc into the std loom. Its a full replacement for the std computer.

Hey PM'd you yet havnt gotten a reply.

Still waiting for exhaust to be sent or atleast an ETA.

I have PM'd you the TNT tracking number.

Edited by Brokenz

Good R34 Rims - SOLD

$270 for the rims posted to melb?? pm meh or txt me on 0422 142 176 if you want that offer broo

Which rims? Scrached Rashed / R34 Rims? Thats fine. I pm'd you but your inbox is full

Edited by Brokenz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...