Jump to content
SAU Community

Recommended Posts

Hi Guys/Gals,

i have a BNR34 RB26DETT, just recently my work machanic serviced my car and he put in NGK Platinum spark plugs after that the car started to misfire bad :D . i put NGK Iridium plugs back in and the misfire is a little better but it's still there. now it's getting worse and worse the car is splattering and when i accelertate car just splaters and doesn't go anywhere. would a retune fix this or is it deeper than that. any help and suggestion would be greatly appriciated.

Link to comment
https://www.sau.com.au/forums/topic/226088-engine-is-fd/
Share on other sites

Coppers for the win at around .8mm gap

Check all the plugs are clicked in

Check that the contacters in the bottom of the coil packs are still there i had a set floating around the floor of my car put them in and was missing found the contacter on the floor put in back in and is good you will have to remove the rubber boot to find them also while your there give them a clean with some fine emeroy paper

If that all fails swap over coils and air flow meters only do one at a time to find out which is f**ked

Link to comment
https://www.sau.com.au/forums/topic/226088-engine-is-fd/#findComment-3983011
Share on other sites

Bit early for R34 coil packs to be failing.

Does it have an aftermarket ecu. If so id say it needs a retune and some fresh copper plugs.

Two words Race Pace

Racepace is were i got my stage1 done and were i normally get my car serviced. the 1 time i didn't take it there this happens. anywayz tried to book but Ben said he's busy for 2 weeks.

Link to comment
https://www.sau.com.au/forums/topic/226088-engine-is-fd/#findComment-3985989
Share on other sites

so is it constantly or just under boost?

constant. when engine is cold it's misfire is really really bad but once it's working temp it's kind of ok (but still there). must be foul on plugs until high temp burns most of it away hence ok when warm. what do u guys/gals think?

Link to comment
https://www.sau.com.au/forums/topic/226088-engine-is-fd/#findComment-3986292
Share on other sites

yeah loose plug then, check the coilpack loom and all plugs, even unplug and replug them all

if the coils were old and tired it would misfire on boost but be ok for normal load

if the gap was wrong it would be fine for normal load only on boost it would misfire

Link to comment
https://www.sau.com.au/forums/topic/226088-engine-is-fd/#findComment-3986303
Share on other sites

ok...thats the answer i been waiting for.....what i reckon is wrong is that the connector prong to the coil on misfiring cylinder isnt fitted into the connector properly ive done it myself....what you do is let the car idle and disconnect each coil connector until you find the one that doesnt make a diffrence and theres your culprit

Link to comment
https://www.sau.com.au/forums/topic/226088-engine-is-fd/#findComment-3986933
Share on other sites

I just got my car back from the mechanic with the same problem. What the problem was, the coil pack wire was shorting out and caused the car to misfire like hell. He replaced the sparks (copper ones gapped to .8) due to them fouling up and changed the coil pack wire. Car is 100% better.

Link to comment
https://www.sau.com.au/forums/topic/226088-engine-is-fd/#findComment-3989955
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...