Jump to content
SAU Community

Car photos

Steve

By Steve,
in South Australia

 Share

Recommended Posts

Steve Grand Master

Steve

Posted
  • Author
Posted

Thanks for the kind words:D I was pretty impressed with the BOV too esp as I was expecting the usual rubber pipe.

The other thing that really impressed the hell out of me was the 100mm - 80mm air pipe to the turbo, all hand crafted. Also all the bends are steampipe and been blended so well they look like mandrel bends.

Evan truley does magic work, and as usual the photos just dont do it justice.

Had a bit of a chat to him about a new plenum - probably 3-4 weeks until he has finished making them and another week to go through fitting and testing.

Link to comment
https://www.sau.com.au/forums/topic/22635-car-photos/#findComment-485949
Share on other sites
Steve Grand Master

Steve

Posted
  • Author
Posted

Cheers guys.

Paul would be good to see the photos of your baby once shes done:)

Well hippy I got a Signal sticker in the garage, only prob is I dont have any signal bits. Lots of HKS bits on the car and waiting to go on the car, just no HKS sticker - spose I'll have to get one before I wind in too much boost:D

Car is now getting tuned, unfortunately my little boy is still sick, so I cant be there. Cant wait, even with out a tune the car seems soooo much more responsive off boost, and the note is awesome, nice growl, even at idle sounds a bit angry.

Link to comment
https://www.sau.com.au/forums/topic/22635-car-photos/#findComment-486613
Share on other sites
Steve Grand Master

Steve

Posted
  • Author
Posted

Thanks Dean, I am using a 40mm HKS standard wastegate, hope its big enough, its rated to over 500hp, so should be ok.

I will get a rwkw figure, but it will be no where near 300. The plenum has me a bit concerned, so I asked them to please just do a really safe tune, and keep the AF ratios on the conservative side. When the plenum has been upgraded, I will be doing head gasket and cams then start winding in the boost and see how close she gets to 300:)

Link to comment
https://www.sau.com.au/forums/topic/22635-car-photos/#findComment-486656
Share on other sites
EVOIV Community Regular

EVOIV

Posted
Posted

Hi Steve, nice car!! ;) Very nice pipework. Is that all mild steel with black coating? That's not stainless steel? Otherwise I thought you would have gone for the shiny piping?

Are you going to get rid of the 80mm AFM and replace with a MAP sensor? I guess that depends upon what ECU you are running? I particularly like the heat shield around the exhaust housing. Was that custom made? If so, how much?

Link to comment
https://www.sau.com.au/forums/topic/22635-car-photos/#findComment-486774
Share on other sites
Steve Grand Master

Steve

Posted
  • Author
Posted

Hippy, I doubt it ever will.

EVOIV: thanks. the manifold is mild steel, everything else was done in stainless including the dump, except for the hills plenum of course. I had it all ceramic coated, plus I will be heat wrapping the dump too. I would have had it coated even if it was stainless, as I like the idea of keeping the gasses moving as fast as possible. I went mild as I didnt see the need for stainless on the manifold.

I am running power fc, and I would like to keep afm. The heat shield was custom made, I shall check to see how much it was. I had so many things done at once it is hard to remeber what each bit cost:)

Link to comment
https://www.sau.com.au/forums/topic/22635-car-photos/#findComment-486798
Share on other sites
EVOIV Community Regular

EVOIV

Posted
Posted

Just a question, why would you want to keep the AFM if it restricts air flow, even slightly - being 80mm? Also, I know that the Japanese Power FC can come with a map sensor. Do you know if it's possible to get that? Or, you can do what AutoBarn's 180 did (before). Which was use the AFM after the intercooler, don't know how well it worked...but the car made great power. That way you could use a full 100mm pipe from airfilter to turbo.

I think the mildsteel manifold was a good choice as I've heard that stainless ones are more prone to cracking, just like mine did ;) What's next on the mod list? :) Will be good to see what results your car makes. I'm sure it will make a bucket load.

But do you find that the car is substantially laggier than normal? My car was a slug off boost. Felt slower on the road, unless I really pushed it on boost.

Link to comment
https://www.sau.com.au/forums/topic/22635-car-photos/#findComment-486823
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...