Jump to content
SAU Community

3 Piece Rims, What Is The Best Way To Color Them?

CEF11E

By CEF11E,
in Exterior & Interior Styling

 Share

Recommended Posts

CEF11E Veteran

CEF11E

Posted
Posted

I am just about to have my car repainted and am going a color change. so my wheels will be painted to suit the car.

They are 3 piece an inner and outer and a centre. they are held together with about 60 bolts per wheel and i just had a tyre refitted and they are siliconed together as a seal. I would prefer to hve them powdercoated but am not sure if the silicone will be ok to be coated. what sort of tempratures in powdercoating baked on at?

Al Grand Master

Al

Posted
Posted

Powder coat is baked on at about 200-250C

If you are coating the center and lip then leaving them whole will be ok; just remove the tyres, valves, and weights.

If you just want the centers coated then you'll need to split the rims and remove the center.

funkymonkey Grand Master

funkymonkey

Posted
Posted

depends on the 3 piece, if its a sandwiched 3 piece (most non racing wheels) which are outer half, then centre, then inner half then you'll have to bust em apart... racing 3 pieces (VS-XX, Miester, some BBS etc) are centre, then the two halves with the centre bolted to the outside of the rim, these you can get away with not having to split the rims, just unbolt the centre.

either way best to get it done at a mag wheel repair shop (not a tyre shop) as they'll be able to torque the bolts up precisely and so on.

CEF11E Veteran

CEF11E

Posted
  • Author
Posted

the rims are 9 and 10"

they are bee-R and are not sandwich fit. so i should be able to take the center out without having to split the rim.

hmmm guess i have to decide wither to leave the lip polished or coated. here i go hunting for some pics of wheels :D

funkymonkey Grand Master

funkymonkey

Posted
Posted
taking em apart is no prob :banana: I have air tools and FWRRT FWRRRRT! and they will be apart.

from memory wheel center bolts have to be hand torqued.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
    • TurboTapin
      Most women will agree that parking is the most taxing part of driving

      By TurboTapin · Posted

      What a time to be alive!!
×
×
  • Create New...