Jump to content
SAU Community

Recommended Posts

Thats just the change interval sticker, do you have service records? if not assume it has not been changed

Genuine Nissan belts come with a similiar sticker that has the as space for the kms to be written on.

This is then stuck near by so easy to determine belt has been changed.

Link to comment
https://www.sau.com.au/forums/topic/226569-timing-belt/#findComment-3989351
Share on other sites

Yes it should mean that belt was changed, but, the only way to know for sure is to take the cover and have a look yourself. I have recently done a timing belt change and mine was about 40,000k's old when the 100k service was due, (damn those skyline odometers are spot on lol), Undo the fan and remove then you will have some space to get cover off(may need to take belts off also) mark all things that your not sure of with alignment lines to help put it back as you found it ie cam-timing sensor. You can get engine manuals from jpnz for around $150 and I would highly recommend one of those as it will help you save a shitload of cash not having to fork out for a mechanic :D

Link to comment
https://www.sau.com.au/forums/topic/226569-timing-belt/#findComment-3989357
Share on other sites

thanks guys

ive changed a belt before just not sure if that sticker means "100,000 service due soon" or "100,000 service completed"

so guess when the engine is out the cut ill inspect the belt

do worn belts have cracks in them or are they just saggy?

Link to comment
https://www.sau.com.au/forums/topic/226569-timing-belt/#findComment-3989364
Share on other sites

thanks guys

ive changed a belt before just not sure if that sticker means "100,000 service due soon" or "100,000 service completed"

so guess when the engine is out the cut ill inspect the belt

do worn belts have cracks in them or are they just saggy?

Belts can have many causes they may lead to failure. The way i look at it, at the end of the day a timing belt is seriously one of the cheapest parts you can buy for any car. If in doubt just change it...its going to be a hell of a lot more expensive if it lets go..

Cheers

Cam

Link to comment
https://www.sau.com.au/forums/topic/226569-timing-belt/#findComment-3989907
Share on other sites

I understood that the sticker was put on at the time-of-manufacture, and was a reminder that the belt needs to be changed at 100k.

Mine doesnt have it, and it would be the first manufacture release I have seen with it, however most service centres here would write next change at 200k or place the sticker to say 100k done like that is. Pull the cover off and have a look, update post and put me outa my misery

Link to comment
https://www.sau.com.au/forums/topic/226569-timing-belt/#findComment-3990223
Share on other sites

thanks guys

ive changed a belt before just not sure if that sticker means "100,000 service due soon" or "100,000 service completed"

so guess when the engine is out the cut ill inspect the belt

do worn belts have cracks in them or are they just saggy?

If you start seeing cracks it usually means it is due for a change. However in saying this - the timing belt is a rubber part and it will deteriorate, therefore age can sometimes be of more concern as opposed to Ks. So if your car is older than 10 years old and unsure of the history i highly recommend replacing the timing belt for piece of mind. I also recommend this for hoses too.

Link to comment
https://www.sau.com.au/forums/topic/226569-timing-belt/#findComment-3990327
Share on other sites

Ignore what Todd and some others have said, the sticker is informing you WHEN it needs to be changed, NOT that it has been changed.

With regards to Skylines and other imports, you can not determine when or if the belt has been changed, and sometimes even taking the timing belt cover off and checking wont give you an indication of age.

Play it safe, if you dont think it's been changed, GET it changed, the belt it's self (for a Nissan CA anyway) is something like $27.

For a $3k+ rebuild, dont risk the timing belt.

Also, some places have different ways of notifying ysers of the change, either by removing the sticker, or placing a new sticker on informing of the change, my CA powered 180sx, the wanker that did the change simply removed the sticker and scratched a 1 in the timing belt cover to say it was changed once.

B.

Link to comment
https://www.sau.com.au/forums/topic/226569-timing-belt/#findComment-3994380
Share on other sites

  • 9 months later...

sorry to hijack the thread pplz but...i was told to replace the water pump along with the timing belt. wud that be rite? i'm looking to change the belt myself for the first time.. currently downloading the workshop manual. if any1 needs it feel free to send me a pm :banana:

Link to comment
https://www.sau.com.au/forums/topic/226569-timing-belt/#findComment-4568103
Share on other sites

Your timing belt was changed at 63,155 km's.

The Chinese / Japanese character next to the 12 means (Year) and the Chinese / Japanese character next to the 4 mean (Month)

So the timing belt was changed on the 12th Year of the 4th Month...

Link to comment
https://www.sau.com.au/forums/topic/226569-timing-belt/#findComment-4568120
Share on other sites

Your timing belt was changed at 63,155 km's.

The Chinese / Japanese character next to the 12 means (Year) and the Chinese / Japanese character next to the 4 mean (Month)

So the timing belt was changed on the 12th Year of the 4th Month...

So when was it changed? The RB25DET is from a R33 skyline. So was it changed 12 years after 1996 or in 2002 or what?

Link to comment
https://www.sau.com.au/forums/topic/226569-timing-belt/#findComment-4568211
Share on other sites

sorry to hijack the thread pplz but...i was told to replace the water pump along with the timing belt. wud that be rite? i'm looking to change the belt myself for the first time.. currently downloading the workshop manual. if any1 needs it feel free to send me a pm :P

yes people generally change the water pump while doing the belt

Link to comment
https://www.sau.com.au/forums/topic/226569-timing-belt/#findComment-4568227
Share on other sites

So when was it changed? The RB25DET is from a R33 skyline. So was it changed 12 years after 1996 or in 2002 or what?

post-46584-1241174088_thumb.jpg

I got my parents to translate it for me as they are Chinese.

Ok the Top (last bit) of the sentence translates to "Change of Timing Belt at"... 100,000km"

Not sure what the middle sentence translates too as it is in Katakana (My parents can only read Kanji)

The last sentence translates to "Timing Belt was changed at" (in you case) 63,155km's on the 12th Year and 4th Month.

OK... Most timing belts in Japan would have been changed just before the 80,000 km's mark.

More importantly is the year it was changed. (12th Year of the 4th Month)

The Japanese year system is based on the emperor's reign.

The Showa Period ended in 1988, so a 1989 build car is Heisei 1.

If I have decoded this right,

This year is 21 (1988 + 21 years = 2009)

Your sticker says (12th Year) 1988 + 12 years = 2000

So it seems your Timing belt was changed in the year of 2000 in April.

Link to comment
https://www.sau.com.au/forums/topic/226569-timing-belt/#findComment-4568567
Share on other sites

post-46584-1241174088_thumb.jpg

I got my parents to translate it for me as they are Chinese.

Ok the Top (last bit) of the sentence translates to "Change of Timing Belt at"... 100,000km"

Not sure what the middle sentence translates too as it is in Katakana (My parents can only read Kanji)

The last sentence translates to "Timing Belt was changed at" (in you case) 63,155km's on the 12th Year and 4th Month.

OK... Most timing belts in Japan would have been changed just before the 80,000 km's mark.

More importantly is the year it was changed. (12th Year of the 4th Month)

The Japanese year system is based on the emperor's reign.

The Showa Period ended in 1988, so a 1989 build car is Heisei 1.

If I have decoded this right,

This year is 21 (1988 + 21 years = 2009)

Your sticker says (12th Year) 1988 + 12 years = 2000

So it seems your Timing belt was changed in the year of 2000 in April.

That makes sense...

Link to comment
https://www.sau.com.au/forums/topic/226569-timing-belt/#findComment-4568606
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...