Jump to content
SAU Community

Recommended Posts

  • Replies 96
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

i cant believe that brett - if wsid's timing equipment was out of calibration by 1 pooftenth then u have your 10 sec pass :ermm:

anyway, my clutch will be done by the end of this week so i'll be ready to run next wed!

the last time i did my 11 i was pulled up after the run & asked for an andra licence which was required for anything under a 12sec, were u asked when u did ur run? im wondering if i can get away without this licence for the next time im out there...what are your thoughts paul & did u also get my pm?

  • 2 weeks later...

i finally got out there last night & did my run - btw my new exedy twin plate clutch is awesome so i highly recommend this to anyone looking for a strong clutch...

i did my 4 runs & here are the results of my last 2 runs:

8.00pm run:

11.18ET, 1.54sec60' @ 118.75mph

unfortunately i kept it in 3rd gear across the finish line & it was literally on the limiter for what probably felt like 1sec.

this would have been my 10sec run if i shifted into 4th.

9.30pm run:

11.15ET, 1.61sec60' @ 128.65mph

this time i short shifted into 4th gear earlier than usual @ approx 7500rpm to drive the car across the finish line which gave me the better mph BUT i ruined my 60' launch as i didn't put enough heat in tyres, the car kicked out almost 45degree in my 2nd gear burnout & i couldnt bring it back so i had to let it go.

the equation i was given is every .1sec you save on a 60' time = .2sec save on ET time.

from this if i get my 60' down to 1.51sec im there, i.e. 11.15 - .2 = 10.95 (i now know how to launch & drive my car, finally...)

paul - thank you once again for allowing me to borrow your wheels & suspension, you're 1 of a kind :whistling:

i will be getting out there once again over the next few weeks to claim my 10 :D:):)

Hi Marko,

I ran a 10.95 @ 127mph with 1.607 60ft in my GTR and a bloke I know ran a 10.8 something at 125mph, So you definatly have it! :whistling: . I was running Federal tyres.

Cheers Scoop

i finally got out there last night & did my run - btw my new exedy twin plate clutch is awesome so i highly recommend this to anyone looking for a strong clutch...

i did my 4 runs & here are the results of my last 2 runs:

8.00pm run:

11.18ET, 1.54sec60' @ 118.75mph

unfortunately i kept it in 3rd gear across the finish line & it was literally on the limiter for what probably felt like 1sec.

this would have been my 10sec run if i shifted into 4th.

9.30pm run:

11.15ET, 1.61sec60' @ 128.65mph

this time i short shifted into 4th gear earlier than usual @ approx 7500rpm to drive the car across the finish line which gave me the better mph BUT i ruined my 60' launch as i didn't put enough heat in tyres, the car kicked out almost 45degree in my 2nd gear burnout & i couldnt bring it back so i had to let it go.

the equation i was given is every .1sec you save on a 60' time = .2sec save on ET time.

from this if i get my 60' down to 1.51sec im there, i.e. 11.15 - .2 = 10.95 (i now know how to launch & drive my car, finally...)

paul - thank you once again for allowing me to borrow your wheels & suspension, you're 1 of a kind :D

i will be getting out there once again over the next few weeks to claim my 10 :):):)

Hi Marko,

I ran a 10.95 @ 127mph with 1.607 60ft in my GTR and a bloke I know ran a 10.8 something at 125mph, So you definatly have it! :( . I was running Federal tyres.

Cheers Scoop

what power are you running awkw? on federals cracking a 10sec is awesome!!!

how much awkw does your mates car have?

You probably could be a little faster to half track are you slamming those gears ? :). On the 11.0 run I did a 1.605 60ft and was [email protected] to half track and 127mph through the top . So your pretty much on the limiter in 3rd right at the end ?? . I remember when I had my 32 I would have to pull 4th comfortably before the finish weird .

im conscious of my gearbox as i have broken 3rd gear in my previous gtr (that was due to changing too fast on the street) - so im not slamming my gear changes or flat changing but yes i can improve in this area which will save me time

at the end of the track i cant hold 3rd gear, i tried this in my 2nd last run & hit the limiter way before the finish line, my limiter is set @ 8500rpm. i need to get it in 4th gear to cross the line

im almost @ 129mph so i know my car will do a 10 easily - practise will get me there

  • 2 weeks later...

hey,

sorry for the tard question, but what is flat changing? and for drag racing is it a good idea when gear changing to give the throttle a quick bump to keep revs constant to help syncros?

any advice would be appriciated

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...