Jump to content
SAU Community

Recommended Posts

OK, went for a drive in an Evo VII today and I think I'm in love so I'm thinking of selling the DR, car has FJ20et with forgies, tomei cams/cam gears, oringed, GT30/35 turbs, 550 injectors, S14 4 pots and coilies up front, S13 struts and DR discs down the back, brand new Exedy HD button clutch, FJ turbo 5 spd, R200 LSD, 69xxx kays and is in excellent condition, looking for offers over $16,000,can email pics if required, cheers, Vaughan.

Link to comment
https://www.sau.com.au/forums/topic/226744-eoi-dr30-rsx/
Share on other sites

Nuthing definate at this stage guys, probably once the new clutch and the nutso FJ go back back in and I go for a drive all thoughts of EVO might go out the window who knows, like I said it all depends on if there's any interest in the DR. At the end of the day I want to compete in the Targa West next year and while the DR is a very capable car it's not an EVO and I can't swing it with the missus to let me spend that much on the DR :( lol.

Link to comment
https://www.sau.com.au/forums/topic/226744-eoi-dr30-rsx/#findComment-3994134
Share on other sites

Go for a drive in a decent Evolution 6/6.5 , slightly smaller lighter and nimbler that the 7 . 7's had all sorts of issues with ACD programming and were the first of the larger (now last gen) body style .

In it's own way the 6's are a classic having left their mark on the international rally scene in their day which was ~ 99 2000 from memory .

Be careful here , once you've had all wheel drive it's difficult to go away from it .

I put an AWD gearbox in my old Subie RX Turbo and the difference is quite noticable .

A .

Trust me , there is life after FJ20 turbo engines .

Link to comment
https://www.sau.com.au/forums/topic/226744-eoi-dr30-rsx/#findComment-3994416
Share on other sites

go get a loan and buy the lancer.

the dr sounds nice. i wouldnt sell it.

its a lot easier to buy a lancer then it is to buy a clean dr30.

You may come to a time where you want to buy another dr30 and you wont be able to afford it.

My mate had a mint 2door LJ torana 6 years ago. The dick head sold it for 6k and now wanted

another one to do up and paid 6k for a rust bucket!

Link to comment
https://www.sau.com.au/forums/topic/226744-eoi-dr30-rsx/#findComment-3994982
Share on other sites

A year or two ago, I started sending out messages that I was interested in selling my DR.

I had a few bites, but I think that it was obvious that I wasn't 100% committed to the sale.

The car sits in the driveway at present, with a new SAAS drivers seat, awaiting the final fitout of my PWR Water-to-Air IC (and a re-map of the Haltech to factor in the IC).

I shall try to re-register it over summer, because even with 140kW, it's a blast to drive & is a classic Japanese car.

If you have to sell it, then do so. But be damn sure about it!

Link to comment
https://www.sau.com.au/forums/topic/226744-eoi-dr30-rsx/#findComment-4008414
Share on other sites

Car is now for sale, is just getting a bit of work done to it at the moment but should be ready to go in a cupla weeks, looks like a blown head gasket :D . And yeh the 6.5 seems to be the go but the styling is looking a bit dated now, looking at a VII or VIII depending on cost, kays and condition. Won't be driven much as I'm on a 2and1 FIFO roster.

Link to comment
https://www.sau.com.au/forums/topic/226744-eoi-dr30-rsx/#findComment-4008835
Share on other sites

Car is now for sale, is just getting a bit of work done to it at the moment but should be ready to go in a cupla weeks, looks like a blown head gasket :happy: . And yeh the 6.5 seems to be the go but the styling is looking a bit dated now, looking at a VII or VIII depending on cost, kays and condition. Won't be driven much as I'm on a 2and1 FIFO roster.

2&1 FIFO roster out of Perth?

unless you're pi$$ing your money up the wall, you should easily afford the Evo as well as keeping the DR.

Jus be done with it and get an Evo 9 :bunny:

Link to comment
https://www.sau.com.au/forums/topic/226744-eoi-dr30-rsx/#findComment-4009115
Share on other sites

LOL yeh maybe FIFO but still have a mortgage, Mrs etc etc, hardly get to drive the DR so even less chance with 2 cars. Sad to say I can't justify having a car in the shed just cos I like it (the DR) I need something a bit more practicle that the Mrs can drive at a pinch, where with the DR she won't even be a passenger :bunny:

Link to comment
https://www.sau.com.au/forums/topic/226744-eoi-dr30-rsx/#findComment-4009480
Share on other sites

Life is always at a crossroads . I had a nice DR30 and I enjoyed it at the time but tastes and technology march on .

One train of though may be that you've had yours and enjoyed it and maybe it's time to move on a let someone else have the experience .

It's always nice to see a fav car go to a good home and with care it will still be out there .

A .

PS run the Evo idea past she who must be obeyed because they are expensive toys too .

Link to comment
https://www.sau.com.au/forums/topic/226744-eoi-dr30-rsx/#findComment-4010429
Share on other sites

How serious are you about Targa West? What I mean is: are you looking for an Evo that you can drive every day, and then put a bolt-in cage in and throw at the scenery once in a while, or are you looking for a serious car?

Here's a nice one that recently appeared on my forum: Evo 8

or you can get the new Evo X for $41,900 from Ralliart.

TBH, if you are thinking of the former, you would be better off using the DR...

Link to comment
https://www.sau.com.au/forums/topic/226744-eoi-dr30-rsx/#findComment-4012511
Share on other sites

The car won't be a daily driver as I only spend 1 week out of 3 at home, as far as the Targa is concerned I am definately interested and rather than go all out (cage etc) I can run in the Challenge comp and just have a bit of fun instead of going all out on a bituman killer.

Link to comment
https://www.sau.com.au/forums/topic/226744-eoi-dr30-rsx/#findComment-4013727
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...