Jump to content
SAU Community

Recommended Posts

Very keen to sell my truck again. It's been for sale now on and off for 2 years! lol. To be fair I never did really take out any ads or anything other than SAU.

This truck has done under 1,000kms in the 2 years I've owned it. I've used it purely to move house a couple times and move some big parts around etc. I'm about to use it to move house again and now really want it sold.

It has FULL service history from brand new. Is in outstanding condition, runs like clockwork every time I need it. The only thing I've had to do to is is recharge and replace the batteries I keep letting go flat from lack of use. It also has great aircon which is lacking from a lot of commercial vehicles. Don't know what else I can say about it. It's very easy to drive, just regular 5 speed box, nice power steering, has switchable exhaust assisted brakes too for when you've got a load on or turn it off when you want to keep the noise down. I really can't fault it in anyway, but I just don't have space or money to keep it any more. I now have 6 cars and 2 motorbikes and need to sell something off badly.

Rego is due for renewal this month so it'll have 6 or 12 months rego on it and be ready to rock.

ASKING PRICE NOW DOWN TO $15,500. You would be lucky to buy the pantec for that much, let alone the truck under it...

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 2 weeks later...

Hey Charlie, the pantec is about 4 meters long and 1.85m wide, ceiling heigt inside is 1.75m. Length overall is 5.4m and height overall is 2.4m.

  • 8 months later...
  • 2 weeks later...
  • 2 months later...

Hey Richard

What's the engine code on it?? I know Nissan put td42's in some of there trucks but as you said if it was built by Isuzu then it's prob got there engine in it

Hey Richard

What's the engine code on it?? I know Nissan put td42's in some of there trucks but as you said if it was built by Isuzu then it's prob got there engine in it

this pic shows a nissan td42 http://www.skylinesaustralia.com/forums/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=173716

  • 1 month later...

yeah it's a TD42. just fired it up again the other day and put 12mth more rego on it. truck is running nicely. I hadn't driven it for more than 6th months but it started instantly and runs just as sweetly as always. with a full 12mths rego on it now would be a good time for someone to buy it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...