Jump to content
SAU Community

Recommended Posts

Well I just found out today that I can't make either Lake Mountain or Targa Tas this year due to work commitments.

So I'm thrilled to have spent all that $$$ on my car especially to do them now!

:cheers:

We're out of Lake Mountain due to my chauffeur having to attend a wedding on the Saturday :)

So...I'll do the tour instead for sh1ts and giggles. :sick:

Lowth is doing the tour in his new toy again with a couple of other guys as well. I might try and do the same if I can make it up for any time at all that weekend. But I know I'm going to have a consultant over from The Netherlands during that time and at 950Euro/Day I'm going to be needing to get my monies worth for his time!

Cheers Tim. Is that for Targa or Lake Mountain?

Dan: Lake Mountain mate. I sent Helen an email yesterday but have not heard back as yet. :P

Whoops Targa I meant, spoke to my sister recently who works at Wrest Point and she said it was filling up (was full for TWP), and Strahan is usually booked out by now.

So thats general info for anyone out there now :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...