Jump to content
SAU Community

Recommended Posts

This R32 GTR is one of the cleanest and straightest examples available on the market. Interior is immaculate with all original panels/carpets.

Specs Are---

1992 R32 GTR

Complied in 2001

70,xxx k's (less than 5k on it in the last 12 months)

Factory Midnight Blue Pearl Paint

HKS GT-RS Turbos

HKS Stainless Dump Pipes

HKS Front Pipes

3 Inch Exhaust and Hi Flow Cat

HKS Step 1 Cams

Adjustable Cam Gears

Head Reco'd and Ports given a clean up

Standard Airbox (also includes M's Pod filters)

HKS 550cc Injectors

Adjustable Fuel Regulator

600hp In Tank Fuel Pump

Apexi Power FC & Controller

120mm Mick's Metalcraft Intercooler

Jim Berry Custom Cluch & Pressure Plate

Lightened Flywheel

Lowered King Springs

RWD Switch

Turbosmart Bleed Valve

Leather Nismo Shifter

Rays 3 Peice Racing Rims 17x9's, 275 Federal Tyres

It is for sale for $21,000.

Car has run 10.97 @ 127.4 MPH (May 06)

Has only been run once at WISD (5 runs only)

502.2 hp @ the wheels running 1.2bar

Includes standard rear wing

R34 GTR rims in the photos aren’t included

gallery_2925_2702_72216.jpg

gallery_2925_2702_108028.jpg

gallery_2925_2702_73298.jpg

gallery_2925_2702_1123.jpg

gallery_2925_2702_87735.jpg

gallery_2925_2702_28834.jpg

gallery_2925_2702_187022.jpg

gallery_2925_2702_61795.jpg

gallery_2925_2702_57190.jpg

gallery_2925_2702_6530.jpg

Any questions, just drop me a PM

Edited by zillar
Link to comment
https://www.sau.com.au/forums/topic/228124-fs-500bhp-10-sec-gtr/
Share on other sites

This gets the Blitz tick of approval.

In the 8 years I have owned Skylines, this car is the best example of a true genuine BNR32 I have ever seen.

You will be hard pressed finding another R32 GTR anywhere in the country that matches the standard of this car, especially at this price.

This gets the Blitz tick of approval.

In the 8 years I have owned Skylines, this car is the best example of a true genuine BNR32 I have ever seen.

You will be hard pressed finding another R32 GTR anywhere in the country that matches the standard of this car, especially at this price.

Been sitting here admiring the pics Blitz. wondering wether they were actually chopped or not. It looks immaculate.

Been sitting here admiring the pics Blitz. wondering wether they were actually chopped or not. It looks immaculate.

A mate of mine used to own this car...it looks better in real life.

It has an ex-twoogle intercooler...yay

Wish i had 20K handy

Edited by DiRTgarage
Been sitting here admiring the pics Blitz. wondering wether they were actually chopped or not. It looks immaculate.

No they were not chopped, suggesting as much is almost an insult.

The first 5 photos are straight off my camera

Thanks for the kind comments guys.

I really hope I can find a fussy buyer as the photos really don't do it justice.

All PM's replied

EDIT:

Some ppl have asked about the other rims that would come with the car, so here you are:

gallery_2925_2702_102780.jpg

Edited by zillar

Holy Shite BATMAN!!!! This is immaculate:) Tell me you want to trade with my BF XR6Turbo. PM me if your keen and if I can sell mine in next few days, consider it gone!!!!

Somehow I don't think this car is going to last on the market for long, so I won't bother wishing the seller any luck. Just express my envy to the future owner in not being able to buy it myself.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...