Jump to content
SAU Community

Recommended Posts

lol, vb as ur username..

i was in werribee 2 nyts ago, and seen a brand new ve ssv ute, with 4 antenas and a copper driving it..

bastards are in ute now lol.. wats next, mazda 2's, and hyundai excel's ffs..

its not like there invisable with all those antena's and shit..

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I never heard back from him :banana::D:D:D:D:D

I'd say you're off. I reckon there'd be a tonne of paperwork to run you off the road as opposed to an on-the-spot fine.

bastards are in ute now lol.. wats next, mazda 2's, and hyundai excel's ffs..

I read somewhere that this is part of their 'any car could be a cop' campaign, i saw an unmarked jeep wrangler in the city awhile ago, and read of them using R32's and the like with P-plates to nab you.

many years ago they di the same thing, they used sports bikes, 4wd's, utes and even a couple of mx5's, worked well apparently.

I know they use utes and mazda bravo's along the hume in nsw.

a couple guys at autobarn saying there was a factory R33 GTS4-T? dubious at best...

i'm 99.9% sure there was never a FACTORY turbo 4wd.

get the VIN and run it through FAST, should prove it then

a couple guys at autobarn saying there was a factory R33 GTS4-T? dubious at best...

i'm 99.9% sure there was never a FACTORY turbo 4wd.

get the VIN and run it through FAST, should prove it then

interesting........what stops somone from claiming there R34 is a GT4 modified to turbo standards?

or taking the vin n stuff off a gt4 and putting it on a GTT?

I was as surprised as you guys are about this autobarn guy... but apparently he owned one..

I asked him are you sure it didn't have a conversion and he said no....

but I have never heard or seen of one... so maybe he was crapping on...

even on those spec sites it includes r33 gts4s... but never seen turbo versions....

if you said your gtt has been modified for a gt4 and they didn't believe you, wouldnt you need a engineers certifcate to show its all been done and been done correctly... and they could ask you to go to a weigh station?

interms of checking vins... even on my rego sticker it doesn't say gts4 because justcar didn't have them on their systems....

Adam

went to gym yesterday at 7.30pm - saw a car pulled over near bp on Stephensons and ferntree gully rds

on the way back, was going to bp to fill up - saw a bike pulled over near the same spot - but this time by an undercover brother...i mean...cop.....

went to gym yesterday at 7.30pm - saw a car pulled over near bp on Stephensons and ferntree gully rds

on the way back, was going to bp to fill up - saw a bike pulled over near the same spot - but this time by an undercover brother...i mean...cop.....

they sit near rickets/hardnet or what ever its called and ping people speeding, have for years

There is a Un Marked Police Motorbike in the Berwick /Narre area as well.

I have spotted him twice today with people pulled over.

Its a

Black/Grey Honda and he is in Black/Grey leathers with a Black Helmet and he has a napsack on his back..

Watch him....

and ppl who drive off either have merc or BMWs i know i talk to a friend at petrol stations and i sore ppl in a BMW drive off and a merc LOLZ u think they can offerd it all with stolen no plates

i thought that guy was on desk duties for stalking some c*nt^

and yes, cops everywhere last night, saw at least 10 of em on a relatively short trip, copped a canary off one of em too (only minor though)

i thought that guy was on desk duties for stalking some c*nt^

and yes, cops everywhere last night, saw at least 10 of em on a relatively short trip, copped a canary off one of em too (only minor though)

yeah i find fridays significantly worse than saturdays...thats my opinion anyway...

what did u get done for? were they undercover?

nope drove passed two marked cars that were both looking over an integra, (i was in my banger prelude daily) then as i was going passed one of em came out after me (i've got a rather loud, obnoxius sort of exhaust), without his lights on, i was turning off the highway (princes) onto clayton road, soon as i went round, lights came on.

i got done for not having a muffler (it fell off a couple of weeks ago, i cbf putting it back on). he put a note on it saying i couldnt drive it till it was on, which i've done now, only took like 30 secs. so now just gotta go vicroads and get it cleared and im sweet :)

not too bothered by it, i was expecting an EPA coz i went through a booze bus last week, they didnt pick me up on the exhaust so as i was driving out, once i got passed the last cop, held it flat till like 7000rpm then slammed second just for the f*ck of it, every single one of em turned around and stared but none bothered to do anything? i was surprised coz without the muffler on it does that 'duck-thats-just-ripped-a-massive-line-of-lui-screaming-into-a megaphone' thing.... WWWAAAAAAAAAAAAAA

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...