Jump to content
SAU Community

Recommended Posts

hey people, I have just recently graduated from TAFE, just completed a Cert 4 In networking and stage 1 and 2 CCNA ..... I am planning to look for work and put my studying aside for now, Been trying to get into a entry level job and its so hard... applied for many jobs on seek and other websites.. lol never got any calls due to that i have no experience ..

So i am hoping any1 on here can get me a job.. once i'm in, will give u $200

easy money... thats 2 weeks of free fuel LOL...

Help a brother out haha

THanks

Welcome to the wonderful world of IT. My best advice to you is get out while you can cause its not worth it. Do something else while you still can lol. Ok if that did not change your mind then i suggest you go around to some IT Recuritement agency and talk to them they will want your resume sent via email and follow up and tell them you will pay them $200 if they can find you a IT job haha. I am sure it will work out soon or later but keep following up with them.

When you do get a job most likely it will be on a contract basis work your ass off so you get a good reference its all worth more than your studies alone.

...if i had of know this when i got in IT I would have spent an extra yr at uni doing a engineering major and be happy right now.

good luck.

If you say that you did not get any calls, then how do you know that is because you have no experience?

If you are not able to get past the 1st step ie. getting a phone call and an interview, I would suggest that you have a good look at your resume and interview skills. I have seen plenty of friends resumes that have been rubbish. after some improvement, all of sudden they were getting calls for interviews.

Use your family, friends and anyone more experienced to help you with the resume and importantly your cover letter.

Some more advise I can give is that those CCNA courses are a big waste of time, ie. CCNA 1-4. If you are serious about learning the material then study it on your own and pass the external certification exam. Doing the 1-4 courses through TAFE or uni are not really worth much unless you have passed the external exam and actually earn the certification.

Welcome to the wonderful world of IT. My best advice to you is get out while you can cause its not worth it. Do something else while you still can lol. Ok if that did not change your mind then i suggest you go around to some IT Recuritement agency and talk to them they will want your resume sent via email and follow up and tell them you will pay them $200 if they can find you a IT job haha. I am sure it will work out soon or later but keep following up with them.

When you do get a job most likely it will be on a contract basis work your ass off so you get a good reference its all worth more than your studies alone.

...if i had of know this when i got in IT I would have spent an extra yr at uni doing a engineering major and be happy right now.

good luck.

ahahhaha you're so cynically like myself...... I'm a BA and I hate my job, and I hate IT.. I wish I did something more exciting like engineering....

Like Bonsai said, get out of IT, it's shiet and too competitive with foreigners, the ones that drive taxis...

Want experience? go do an Internship, mega shit pay... but experience pays off.

I started my first IT job on help desk, that progressed to setting up bullshiet networks for neighbours and friends, got an ABN starting ghosting, building small servers for photo labs, provided network support, Invoiced people, then I got a contract with Defence doing QA work, from there I moved onto a BA role..

yeah... I had to climb the ladder.

nah i got replies back sayin they had more better candidates with revelent experiences ..etc and i get replies bak from email that i do not meet there criteria...liek i got revelent knowledge but lack experience to meet their clients

I own an IT company (in QLD) and can tell you that unfortunately not a lot of personalisation normally goes into the repplies for unsuccessful candidates. It's not great, but imagine how much it would cost to send a personalised reply to 100 unsuccessful applicants that listed the ACTUAL reasons they didn't get the job. It would add thousands to the cost of hiring someone.

So I second the idea that you review the resume and make sure it is good. Employers want experience sure, but with the price of wages these days, someone cheaper who has a very good work ethic, solid foundations and the ability to learn quickly; this can present a compelling case.

But in any case, if you go for a level 1 Help Desk position (big companies are always looking for people coz turnover is fairly high) and stick that out for at least a year (AT LEAST A YEAR - I'll repeat that for the Gen-Ys amongst us :blink: ),then you'll have some experience for a better / more interesting job.

Then if you want decent money in a few years, go study hard and get some big end Cisco quals and get experienced on a range of security appliances and theory.

AFTER you've reviewed your resume, send it to me, ill have a look and forward on to a couple of my mates that are IT recruiters. They will then be able to either help you or give you some real feedback.

I own an IT company (in QLD) and can tell you that unfortunately not a lot of personalisation normally goes into the repplies for unsuccessful candidates. It's not great, but imagine how much it would cost to send a personalised reply to 100 unsuccessful applicants that listed the ACTUAL reasons they didn't get the job. It would add thousands to the cost of hiring someone.

So I second the idea that you review the resume and make sure it is good. Employers want experience sure, but with the price of wages these days, someone cheaper who has a very good work ethic, solid foundations and the ability to learn quickly; this can present a compelling case.

But in any case, if you go for a level 1 Help Desk position (big companies are always looking for people coz turnover is fairly high) and stick that out for at least a year (AT LEAST A YEAR - I'll repeat that for the Gen-Ys amongst us :blink: ),then you'll have some experience for a better / more interesting job.

Then if you want decent money in a few years, go study hard and get some big end Cisco quals and get experienced on a range of security appliances and theory.

Finally, a worthwhile response in this thread.

Mate I would also look at one other section of a job aplication.

The cover letter.

this is basically your chance to sell yourself.

you are one of Many graduates who are looking for the same job.

you have to stand out.

a cover letter saying..

Dear Mr X.

my name is johnny and I'm looking for a job in IT.

I done a tafe diploma in technology Y and think that this job is something I might be able to do.

IS NOT GOOD ENOUGH.

The FORMAT of your CV is also very important.

and at this stage in your career, it is probably more important than the text you have on it as you have no experience.

When applying for jobs, they don't make it obvious, but you know the "CRITERIA" section they have... well they are the "questions" you have to answer.

Your job application should have a section where you show past experiences/situations where you've proven you have "those" criteria.

1.) Cover letter

2.) Selection criteria responses

3.) CV

Apparently they have the internet on computers now so you could probably search for information on how to lay out your CV or how to respond to the criteria requirements.

Remember to sell yourself.

Your personality needs to come out in your application.

Since you've got no relevant experience in IT, your other aspects like how you get on with others etc needs to be your selling point, so that a company will spend the time/money on paying and training you.

I'm a BA and I hate my job, and I hate IT.. I wish I did something more exciting like engineering....

Heh i'm the opposite - did a mech eng degree and as soon as i graduated i went into IT (at the bottom of course). The industrial experience work i did for mech eng was boring as batshit - using the australian standard to join the dots design pressure vessels.... GTFO. I love IT!

For the OP - i dunno what that "stage 1 and 2" CCNA stuff is, but if its the Cisco certified network associate, just run up a copy of dynamips, study the shit out of it and go for the cert. There's plenty of study guides about. Its an easy cert. You're probably going to start at helldesk, so a Microsoft cert might help as well.

Stage 1 and 2 means nothing without you taking the actual exam and pass it.

I've gone through all 4 stages of ccna and did my exam and passed. Do it while its still fresh in your mind I would say. The longer you wait, the less motivated you are.

Start off small, 36k - 40k helpdesk role are relatively easy to get, but if you can land one in a big company, it'll be a plus. You'd be amazed how much skill you'll actually pick up by just doing helpdesk stuff. Then in your spare time, get as many IT certs as possible and apply for a nother role either within the same company or a different company. You'll most defitnitly get a healthy pay rise from doing that. I'm speaking from my personal experience.

Btw, half the time you are not getting a response from recruiter is because of your resume, the other half is because you do not fit the technical profile.. Make it as professional as you can and you MUST have a cover letter for every resume you send.

Edited by __PhaseShiftDown

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...