Jump to content
SAU Community

Recommended Posts

Yea, good point, although spring rates can be adjusted on coilovers. The reason why I considered greddy coils is because my choices are 1. very cheap coils like D2 (cca $1000), which according many people wont last long even if just used for daily commuting, then 2. good quality basic street coilovers like TEIN super street, which cost around $1500 (apparently I could get them for less, but god knows where) and then for a little more Greddy S-type.

Besides S-type is (according to their website) designed for comfortable ride:

One man's comfortable ride is another man's trip to the chiropractor.

What's the spring rate?

What's the damping rate?

Why have you limited yourself to those brands?

Ask yourself, which shock absorber manufacturer did Nismo turn to when they needed a better handling package for the upgraded Skylines since 1989? Was it D2? Was it TEIN? Was it GReddy?

Who did Nissan turn to when they wanted the R35GTR to be the best Skyline ever? Was it D2? Was it TEIN? Was it GReddy?

The last question, why shouldn't you enjoy the same technology source for $1250?

Cheers

Gary

Yea, good point, although spring rates can be adjusted on coilovers. The reason why I considered greddy coils is because my choices are 1. very cheap coils like D2 (cca $1000), which according many people wont last long even if just used for daily commuting, then 2. good quality basic street coilovers like TEIN super street, which cost around $1500 (apparently I could get them for less, but god knows where) and then for a little more Greddy S-type.

Besides S-type is (according to their website) designed for comfortable ride:

if i was u id worry about the basics, quality damper, suitable spring rates, height adjustability and strong components. dont worry about things like damper adjustability as its just about useless with ur application. this is why i think tein basics sound like a great solution for people on the street, i would love to hear more about people running the basics, but it seems most people go the super streets. the Tein basic dampers correct me if im wrong, are pretty much super streets without damper adjustability and a few other little things, and as i said before i dont think ull really see any use of the damper adjustability in ur case. in fact if anything id say playing around with the damper in a cheaper one without any experience or tuning tools ull probably hinder the performance rather then improve it, even if it "feels better"

ive heard good things about teins, although only ridden in or driven a few cars with teins, jap and aus spec, so i cant talk much about them first hand, but the damper and spring rates are much more suited to aussie roads than a lot of the jap or korean/taiwan/chinese coilovers.

SK's group buy is a great solution for the road, they were great for ride comfort, and depending on how hard ur pushing through the hills u will probably not notice much difference in speed. unfortunately they are not height adjustable via a thread, they are circlip adjustable which is a bit of a bitch, so might not be ideal for u, although tbh i dont really see the point in constantly changing ride height, find the right height and stick with it, ull find the best height for performance is still quite practical and doesnt look too bad either.

if ur dead set on height adjustability id be grabbing the tein basics for $1300-$1400 or whatever they are, and spending the difference of a more expensive coilover on some whiteine adjustable sway bars.

i've been looking at coil-overs aswell,

on nenguns they sell super street teins for about $1100, anyone know how much postage would costf

they have spring rates of 4kg/mm front and back

would these be the jap spec or oz spec ones and is that spring rate particaly soft for coil overs as i noticed all these d2's etc have rate of about 12kg/mm

another thing, does anyone know how low i can get my r32 with tein super streets

i have HSD HR's. 5kg rear 7kg front, very good spring rates.

but any reputerable brands are good.

but your HSD, ISC brands are excellent value for money

leighton fine in his onevia won DA in 04/05 (cant remember) with HSD coilovers.

i've been looking at coil-overs aswell,

on nenguns they sell super street teins for about $1100, anyone know how much postage would costf

they have spring rates of 4kg/mm front and back

would these be the jap spec or oz spec ones and is that spring rate particaly soft for coil overs as i noticed all these d2's etc have rate of about 12kg/mm

another thing, does anyone know how low i can get my r32 with tein super streets

1. yeah stay away from anything above 9kg front 7 kg rear if its a daily driver, u will probably need psyhio coz of our shitty uneven roads. lol

2. f*kn low, probably just get the top of some 17 inchers in the guard. definately defectable.

leighton fine in his onevia won DA in 04/05 (cant remember) with HSD coilovers.

nah sorry, fine has never won a DA championship, he came 3rd in 05 and 2nd in 06 in his AE86, he didnt use the onevia till 07, where he fell back to 7th in the championship. i beleive darren appleton won in 05 in his onevia, but not sure what suspension he was running back then, although back in 05 the suspension wasnt really as important as it is today, driver skill was a lot lower and the competition was no where near as tight as it is today, car speeds were much lower etc.

Ive been through 2 sets of coilovers (teins, and HKS) only to get:

a) Worst ride possible

b) other components on the car deteriorating due to the harsh ride these shocks provide

c) reduced handling

Mate if your after a good all round package which can be modified for drift, street, or whatever your needs i suggest you go with the SydneyKid Group buy. I have this in my car atm, and it is by far the best handling package from my own personal experience and can be had for your appropriate budget. Why buy a coilover which is not suited to the driving you will be doing?

Shoot Sydneykid a PM and im sure he will point you in the right direction, whether that be with his product or any other on the market.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...