Jump to content
SAU Community

Recommended Posts

  • Replies 144
  • Created
  • Last Reply

Top Posters In This Topic

Quick update, I'll probably be repeating myself on a couple of items but i'm still receiving some requests.

PFC sold,

box, speedo drive and custom tailshaft as good as sold

JJR arms sold

Oil cooler sold

GTSt indicators sold

Just curious man are the cam gears still for sale???? And was i correct in thinking they were the HKS or did i read that wrong? If so condition or pics?? Thanx a bunch

Hi mate. It's only an exhaust gear. No idea on brand. It has done the job for 3 years and hasn't slipped or caused problems in that time. I'll have it out over the weekend some time.

6x550 side feed blitz injectors in rb25 rail sold pending payment

r33 rb25det Power fc inc hand controller sold

r33 S1 RB25DET gearbox with custom 1 piece tail shaft suit r32, modified GTR speedo drive, slave cylinder and modded cross member sold pending payment

rb25 det engine loom modded to suit late r32gtst manual. Minor changes will be needed to suit stock afm (4 wires) and o2 sensor(3 wires). currently wired to suit z32AFM $250

GTR front drivers side guard with lip rolled and a small dent above the wheel arch, silver, $200

GTR front drivers side indicator $100

GTSt indicators, pair sold

GTSt front guards with compliance indicators, pair $300

rb25 ignitor $125

rb20/25 CAS $100

And the after market bits

Trust remote mount oil cooler sold

Xtreme XHD 9 puck clutch kit $500

Cusco comp coilovers damperand height adjustable front and rear 8/6 $850

Cusco master cylinder brace suit 32gtst/gtr $90

Whiteline 24mm front sway bar $180

rb20/26/s1rb25 splitfires $400

Trust type R bov sold pending payment

Just jap B pillar brace $100

Cusco castor rods bent $75 firm

Maltech braided brake lines ADR compliant $250

Just Jap adjustable front upper control arms sold

Stock front upper arms with nolathane adjustable bushes sold

2 Davies craig 14inch thermos $100 ea. I'll throw in the controller if you buy both.

early model hks rb25det cams 256 8.8/264 9.0 $650. If i find i have a spare stock exhaust wheel i'll chuck in the adjustable one at that price

s1 rb25, no coils, no turbo and a set of stock injectors and a rail. sump has a dent in it where it hit the sway bar but can provide a spare, runs well, good compression $1350

bold shows changes from the original ad, plus there's a heap of bits to strip off the shell and interior yet

i can't believe people aren't interested in a set of quality cusco coil overs for a 32 gtst at only $850......

cheers

Dave

Updated again

6x550 side feed blitz injectors in rb25 rail sold

r33 rb25det Power fc inc hand controller sold

r33 S1 RB25DET gearbox with custom 1 piece tail shaft suit r32, modified GTR speedo drive, slave cylinder and modded cross member sold

rb25 det engine loom modded to suit late r32gtst manual. Minor changes will be needed to suit stock afm (4 wires) and o2 sensor(3 wires). currently wired to suit z32AFM $250

GTR front drivers side guard with lip rolled and a small dent above the wheel arch, silver, $200

GTR front drivers side indicator $100

GTSt indicators, pair sold

GTSt front guards with compliance indicators, pair $300

rb25 ignitor $125

rb20/25 CAS $100

And the after market bits

Trust remote mount oil cooler sold

Xtreme XHD 9 puck clutch kit price drop $300 plus post

Cusco comp coilovers damper and height adjustable front and rear 8/6 $850

Cusco master cylinder brace suit 32gtst/gtr $90

Whiteline 24mm front sway bar $180

rb20/26/s1rb25 splitfires $400

Trust type R bov sold

Just jap B pillar brace $100

Cusco castor rods bent $75 firm

Maltech braided brake lines ADR compliant $250

Just Jap adjustable front upper control arms sold

Stock front upper arms with nolathane adjustable bushes sold

2 Davies craig 14inch thermos $100 ea. I'll throw in the controller if you buy both.

early model hks rb25det cams 256 8.8/264 9.0 $650. If i find i have a spare stock exhaust wheel i'll chuck in the adjustable one at that price

s1 rb25, no coils, no turbo and a set of stock injectors and a rail. sump has a dent in it where it hit the sway bar but can provide a spare, runs well, good compression $1350

bold shows changes from the original ad, plus there's a heap of bits to strip off the shell and interior yet

cheers

Dave

hi mate,

I don't know the age of the coilovers, bought them second hand myself about 18 months ago and have done under 10k on them since.

No leaks, happy to post but i expect postage will be in the order of $60 from past experience

Send me a pm and we can talk about price.

cheers

Dave

HKS cams are out, they look like they have never been in an engine :P They have done about 15k.

I found a stock exhaust cam gear so the adjustable gear is also included for $650 pick up as stated above.

cheers,

Dave

DSC00461.jpg

DSC00462.jpg

Hey Mate

I'm quite interested in the rb25, am I right in that its missing coils, turbo and cams? and has a dent on the sump?

Also i live in Adelaide any ideas on transporting it here?

Cheers

Matt

Hi Matt,

The engine has stock cams back in it now. no turbo, coils and i'm struggling to put 6 stock injectors together but i have the rail. I'll have to have another dig through my stuff tomorrow and try and find another couple of injectors.

Yep, dented sump but i have a straight one here which will be supplied with the engine.

I'll have to talk to a freight company about shipping. The engine as it sits has to weigh over 250kg's easily so i can't see it being cheap

  • 2 weeks later...

Updated again

Bold shows changes from original ad

6x550 side feed blitz injectors in rb25 rail sold

r33 rb25det Power fc inc hand controller sold

r33 S1 RB25DET gearbox with custom 1 piece tail shaft suit r32, modified GTR speedo drive, slave cylinder and modded cross member sold

rb25 det engine loom modded to suit late r32gtst manual. Minor changes will be needed to suit stock afm (4 wires) and o2 sensor(3 wires). currently wired to suit z32AFM $250

GTR front drivers side guard with lip rolled and a small dent above the wheel arch, silver, $200

GTR front drivers side indicator $100

GTSt indicators, pair sold

GTSt front guards with compliance indicators, pair $300

rb25 ignitor $125

rb20/25 CAS $100

And the after market bits

Trust remote mount oil cooler sold

Xtreme XHD 9 puck clutch kit price drop $300 plus post

Cusco comp coilovers damper and height adjustable front and rear 8/6 sold

Cusco master cylinder brace suit 32gtst/gtr $90

Whiteline 24mm front sway bar sold

rb20/26/s1rb25 splitfires $400

Trust type R bov sold

Just jap B pillar brace $100

Cusco castor rods bent $75 firm

Maltech braided brake lines ADR compliant $250

Just Jap adjustable front upper control arms sold

Stock front upper arms with nolathane adjustable bushes sold

2 Davies craig 14inch thermos sold

early model hks rb25det cams 256 8.8/264 9.0 inc adjustable exhaust wheel $650.

s1 rb25, no coils, no turbo no injectors. sump has a dent in it where it hit the sway bar but can provide a spare, runs well, good compression $1350

still heaps of parts left on the shell

cheers

Dave

Edited by BHDave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...