Jump to content
SAU Community

How To: Rb26 Plenum On Rb25

Kaido_RR

By Kaido_RR,
in Engines & Forced Induction

 Share

Recommended Posts

1400r Veteran

1400r

Posted
Posted
Are you able to provide photos of the kit in this thread 1400r?

From what I've read, the kits are worth a mint, so I'm going to look into fabricating my own.

PM me if you like 1400r. :)

so you can copy it ?

don't think so mate how's that gonna help me sell mine

Weapon Mentor

Weapon

Posted
Posted (edited)

Or just get yourself a Plazmaman plenum kit, $900 odd. Look a bit better than the Greddy ones and also took me and a mate a couple hours to put on and it was all done, you can retain std TB without an adaptor plate like the Greddy plenum and you can also use the std throttle cable.... except for the intercooler piping does need to bee addressed obviously

Edited by Weapon
Mr. Oizo Grand Master

Mr. Oizo

Posted
Posted
Or just get yourself a Plazmaman plenum kit, $900 odd. Look a bit better than the Greddy ones and also took me and a mate a couple hours to put on and it was all done, you can retain std TB without an adaptor plate like the Greddy plenum and you can also use the std throttle cable.... except for the intercooler piping does need to bee addressed obviously

That defeats the purpose of looking into an ITB setup.

Tave-33 Contributor

Tave-33

Posted
Posted
What do you guys want to know? I've been running the 26 intake and ITB's for a few years on my 25.

I would just like to know what some of the major problems were that you came accross whilst fitting everything up and how u went about overcomming the problem?

Things like what needed to be modified and in what way, such as the VCT which u just removed, or what u needed to relocate?

cheers

Tave-33

Cjmartz2k Proficient

Cjmartz2k

Posted
Posted

I just used a bolt to plug the VCT hole. Needed some gasket material for custom gaskets. I also did a fair bit of port matching. My RB25 is in a R32, so I have VERY little room between the shock tower/brake master cylinder and the surge tank. If the tank ever needs to come off, the BMC is going to have to come out, and maybe the engine. Also, I think I had to use the RB26 oil cooler/filter mount.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Tein Circuit Master- rebuild worth it?

      By MBS206 · Posted

      If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • MBS206
      Best place to order Authetic R32 Parts in Japan

      By MBS206 · Posted

      Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • MBS206
      NC MX5

      By MBS206 · Posted

      Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • MBS206
      Blue slip

      By MBS206 · Posted

      I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...