Jump to content
SAU Community

Recommended Posts

  • Replies 239
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

lol drdoof now you tell me lol

cars washed.......... need help putting long sau sticker on my back window,,,,,, when in carpark can someone give me a hand.... cheers

2nd post yeah was an excellent run.

woo first after post! :D

twas sick, I have a few pics, I'll chuck em up in a bit...

best car there was mine for sure :)

Thanks for the free fuel Pezhead :rolleyes:

Hey Doof, maybe we can just run a line from my exhaust into your petrol tank - like a mid-air refueling rig. Hehe lol!

post-16200-1220169510_thumb.jpg

Great cruise, was really good to get out and meet some of the Sau'ers, and to put a face to the names :)

Didn't use much fuel up either ;):D :D

Lol @ lancer being left behind at the ferry :D

and wtf @ Albert, showed up then left........ :rolleyes:

Got a few pics, will put up laterz

Oh yeah, almost forgot to upload that picture.

I call it "Lonely Lancer"

post-16200-1220171100_thumb.jpg

Wahahaha!!!! OMG! thats awesome!

Yeh lil Albert deff missed out, so did Ryan aka "huh"

Love the looks a whole line of skylines get and we cruise past :rolleyes:

And how nice were those 2 34 Gtr's *drools*




  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...