Jump to content
SAU Community

Recommended Posts

The problem with streaking all comes down to what rag/cloth you are using.

Gotta use rags that feel really dry and rough (towels, flannelet etc)

not smooth or soft...

Best method i have found is.....

Use 2 rags, spray glass and wipe with first rag till most of window cleaner gone...doesn't have to be perfect then spray the glass again but a bit less and wipe with second rag until dry and all streaks gone.

the more dry your rags are the better the result

:(

All of the above works but if you want it looking really wicked then let whatever you have used fully dry, then get yourself one of those microfibre dust cloths (got mine in a $2 shop for... $2 :) ) It also works really wicked on your paint work, makes it come up as if you had it cut and polished, everything needs to be completely dry to do it properly. I have one for my windows, one for the paint work and one for the mags :P

very mild soapy water on window tint only I wouldn't trust anyhting else, especially if you don't know what quality tinting film you have..

+1 for newspaper and vinegar...

Although after washing my car I usually stop by the servo and use their paper towels and if your careful you don't get the lint effect...

i use this window cleaning foam and a special square like pillow made for cleaning car windows it is soft but slightly Abrasive after i rub the foam of with it i go over it with a micro fibre cloth. After that they are pretty much crystal.

Oh and i got both products from supercheap auto.

Edited by phenline

phenline i think i have both the products you are talking about! i found the spray worked awsome sometimes and others it streaked really bad...figured i was using to much of it. I may have to try it with a 2nd cloth to wipe at the end and see how i go.

In regards to metho i think it stuffed my rear window tint(old man put it in my washer bottle) the tint likes whiteish from the inside but i noticed it not long after i got the car so i dont know if it was like it when i got it.

is metho bad for window tint?
phenline i think i have both the products you are talking about! i found the spray worked awsome sometimes and others it streaked really bad...figured i was using to much of it. I may have to try it with a 2nd cloth to wipe at the end and see how i go.

In regards to metho i think it stuffed my rear window tint(old man put it in my washer bottle) the tint likes whiteish from the inside but i noticed it not long after i got the car so i dont know if it was like it when i got it.

Metho is a window cleaner, as I read last time.

But I would not use it on your window tint.

I ment clean the outside of the windows with metho don't rub it in on the inside where your tint is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...