Jump to content
SAU Community

Stagea Autech 260rs

RS4StagMan
 Share

Recommended Posts

AndyD Collaborator

AndyD

Posted
Posted

VERY high km's that is why almost guarantee a rebuild as soon as you pick it up add $5000 or more by the time you do turbo's as well it aint as cheap as it sounds. I was looking aorund japan yards the other day good low km 260rs's still going for over 2-2.5 million yen which is about $22,000-25.000 and add import tax,gst and compliance and there goes 35k. I have seen some superclean low km for around the 4 million mark so no prices haven't come down that much.

cefiro Experienced

cefiro

Posted
Posted

For that type of km I think that the owner would be selling it for a non profit. Its really hard to say, price in japan for that car would see it on road for that sort of money. If the turbos have not been changed then they will need to be soon. in saying that a low modified RB26 should last longer than 144k km, there is nothing like a test drive. i looked for a long time to find mine and import it. Its hard to find one that has the right km on it and sells for a price you can afford. If you do go ahead then get the auction report from the owner and have a good hard look over it to see what condition its in.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...