Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Well I got a quote from AXT Turbo out in Dandenong to "hiflow" my turbo with new steel wheel and upgarde to 360 degree thrust bearings for $1450 also depends on if my exhaust and compressor housings are usable. price also includes any mods that need to be done if any to oil/water feeds

add $550 if I want to be lazy (get them to remove and refit from my car)

is that a good price and has anyone here had their turbo done by AXT??

Well I got a quote from AXT Turbo out in Dandenong to "hiflow" my turbo with new steel wheel and upgarde to 360 degree thrust bearings for $1450 also depends on if my exhaust and compressor housings are usable. price also includes any mods that need to be done if any to oil/water feeds

add $550 if I want to be lazy (get them to remove and refit from my car)

is that a good price and has anyone here had their turbo done by AXT??

Drop in at Kev at eastern just for a chat.... he's been around for 20+years iirc

Too small for an rb25.

Yes it will be very responsive, but would max out at about 215-220rwkw, pretty poor upgrade considering a std turbo can make 210rwkw (max).

A HKS GT2535 (new style) or a HKS GTRS are nice on rb25's

gary, my slide turbo is exactly like that

awesome response, slightly slower off the line Id imagine compared to a rb20 housing, but nevertheless for $800 wow what value

^^^ I'm with Tangles. Love my Slide turbo ... great bang for buck :(

Too small for an rb25.

Yes it will be very responsive, but would max out at about 215-220rwkw, pretty poor upgrade considering a std turbo can make 210rwkw (max).

A HKS GT2535 (new style) or a HKS GTRS are nice on rb25's

dude, a hks gt2530 would be great for a heavy Stagea

would absolutely rip off the line and rev thru to redline, slam thru the auto and keep on going.....

yes, would be maxxed at 220awkw, but shit mate, no different to my Slide turbo. I cant see how she'd go past 225, but damn its a great ride there !

yes a gt2535 would take the stagea to 250, but depends on what you want and bang for buck.

250kw for $2200 new or 220kw $1100 2ndhand, its each to their own really

fyi: having a touch up tune this friday, getting 3 leaks fixed (attessa oring, rocker cover gasket, oil pressure switch), with the toshi ecu rewritten chip and 2x piggybacks, and now the unrestricted exhaust (cat was shagged at 190kw), should be good.

I did read alot of turbo forums and got conflicting information....some say they are shit but yet some say they are good and had no problems

I just wanted to see if anybody here has installed them...and what their experiences were

There is a 6 or 7 page thread in Forced Induction about KKR and everything associated.

Basically anything surrounding performance you should be checking out Forced Induction as its generally been covered in a level of detail thats pretty damn good :laugh:

  • 2 weeks later...

Looks like the guys hasn't sold it because he relisted it again...might make him an offer for it. I wonder if $600US (including delivery) is enough to make the seller bite.

Pretty much the major thing i'm looking at if i do get it is what condition it's in (even though the seller says its in good condition with no shaft play) I guess a service wouldn't hurt

hi jason

you were given lots of good advice at the beginning of the thread.

why not take that advice and buy one of the 'quality' options rather than trying to save a few hundred on an unknown turbo with unknown results, unknown reliability and unknown quality.

unless the standard turbo has actually failed then it will be good for about 200rwkw. if the ceramic turbine ends up in the cat then go and buy something decent or a well inspected 2nd hand standard turbo.

thanks for the advice...it's not like I have gone "stuff what everyone else thinks, I'll do my own thing" - That would have got me a KKR Turbo and forever be told "I told you so" when it goes wrong. But yes a 'quality' turbo is what everybody wants but people can't afford it (like me) and have other upgrades to do as well. (plus target horsepower is not out of this earth)

I'm going to bang for buck. Obviously I'm on a tight budget and sometimes looking for the cheap way out may be good.

Tangles - yes that turbo is oil and water cooled (it's a standard R33 Turbo that had the wheels changed over to steel)

Tangles - yes that turbo is oil and water cooled (it's a standard R33 Turbo that had the wheels changed over to steel)

yeah i asked the seller as well, not a bad price for a turbo that will push 14psi

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...