Jump to content
SAU Community

Recommended Posts

Make:

Nissan

Model:

R32 GTS-T

Milage:

68 XXX

Transmission:

manual

Colour:

Silver

Location:

South Australia

Complied?

Race only

Price:

$8,500

Contact:

Michael 0404 073 346

Comments / Modifications:

1992 R32 GTS-T

RB20DET 5 speed manual

RACE ONLY

cams log book category 3 Group 3D- sports sedan

Cams approved Full weld in cage by walker chassis

standard engine + ECU 12psi 140 + rwkw

Five puck clutch

4.4:1 viscous LSD shimmed (locked)

B&M line locker

GTR aluminium bonnet

GTR front mount intercooler(not in photo)

HICAS completely removed R31 power steering pump

Whiteline heavy duty adjustable rear sway bar

Tanabe dampers with super low king springs

17x8 advan tri-spoke rims with semi slicks

3inch side pipe

mallala the car did a 1minute 24.50 second lap and a 37.74 at collingrove.

will deliver adelaide metro area

Pictures:

Front

Rear

cams sticker

Cams log book

R32 GTS-T

Edited by No.96
Link to comment
https://www.sau.com.au/forums/topic/230117-fs-r32-gts-t-8500/
Share on other sites

More stuff I forgot

Front strut brace

Engine damper

Also the cage goes through to the top of the rear towers and make the chassis very stiff, just like you like it.

Come on drifters is it too much? The engine and gearbox are as smooth as, I'm selling as I have bought a 32GTR to hillclimb and sprint and mum says I'm not allowed to have two race cars that look the same.

Remember it has a Line locker mate and does fully sic burnouts mate.

Approx $400.00 to deliver to Sydney.

I will take more photo's on the weekend.

Can you PM me your email address? I am interested in some good pictures of the interior and cage, material cage was constructed from, how it goes through the dash, side intrustion etc etc

Also, was the car imported for rego, or strictly race only? LOL will give you a call based on the cage being what i need.

Also things like year model, ABS, functioning air con, condition of body/paint, dash, seats etc, dents/rust etc

Bid offer of $5k. (It's an offer to get the ball rolling so don't take offense).

Will need to inspect closer obviously, but looks clean, is it stock paint?

No offense taken, I like fishing too. But I will have to say no at this stage.

The paint is factory, it is straight as with no rust if I was allowed to have four cars and a Go Kart I would keep it, but apparently the kids need shoes or something.

Took some photo's today, It is very hard to photo the interior of a car so you will have to use your imagination a bit. The car looks better than the photos but it will give you an idea. The Velo and belts aren't included in the sale I want those for the GTR the original GTS-T seats will be bolted/Cable tied back in. The dirty old sheet hanging on the door is so you can see the side intrusion bars.

The photo were taken today the date on the camera is wrong.

post-41741-1217673462_thumb.jpgpost-41741-1217673583_thumb.jpg

post-41741-1217673724_thumb.jpgpost-41741-1217673831_thumb.jpg

post-41741-1217673935_thumb.jpg post-41741-1217674125_thumb.jpg

Took some photo's today, It is very hard to photo the interior of a car so you will have to use your imagination a bit. The car looks better than the photos but it will give you an idea. The Velo and belts aren't included in the sale I want those for the GTR the original GTS-T seats will be bolted/Cable tied back in. The dirty old sheet hanging on the door is so you can see the side intrusion bars.

The photo were taken today the date on the camera is wrong.

post-41741-1217673462_thumb.jpgpost-41741-1217673583_thumb.jpg

post-41741-1217673724_thumb.jpgpost-41741-1217673831_thumb.jpg

post-41741-1217673935_thumb.jpg post-41741-1217674125_thumb.jpg

Hey mate, will you sepperate parts? im interested in the rims and rear sway bar.

What condition are the tyres in?

I can swap + cash for standard parts so you can sell car complete also.

Cheers

  • 3 weeks later...
  • 2 weeks later...

It is still for sale. Do you know anyone in Adelaide who can look at it? I can get it to the Patrick Car transport Depot. I just got a car from Sydney and it cost $400.00 to transport.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...