Jump to content
SAU Community

Engine Light? Need Help!

THR34T

By THR34T,
in Engines & Forced Induction

 Share

Recommended Posts

THR34T Mentor

THR34T

Posted
Posted

I never seen this light come on before in my car. ive been told its something to do with the engine. does anyone know the possible causes for the light turning on? what is it indicating i am not sure. i recently had the car major serviced with new timing belt etc. Can anyone tell me possible things that could be wrong to make the light come on and who should look at it to help define the problem?

any advice would be good thanks

post-45807-1217321858_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/230131-engine-light-need-help/
Share on other sites
G0DZLR Mentor

G0DZLR

Posted
Posted
I never seen this light come on before in my car. ive been told its something to do with the engine. does anyone know the possible causes for the light turning on? what is it indicating i am not sure. i recently had the car major serviced with new timing belt etc. Can anyone tell me possible things that could be wrong to make the light come on and who should look at it to help define the problem?

any advice would be good thanks

get a not-so-blurry photo so we can make out the icon, unless you can describe to us what it looks like otherwise

116.hks Community Regular

116.hks

Posted
Posted

someone has probably left a sensor unplugged or there is a sensor playing up and it has logged a code in the ecu. u need to contact an auto elec or if u have a tuner that has a scan tool to check what code it has logged. it usually takes 3 times for the problem to log a code before the code is logged in the computer. have u notice if the car has lost power or hard to start or doesn't idle well etc. hope this helps.

THR34T Mentor

THR34T

Posted
  • Author
Posted (edited)

cheers for advice..its NA so no boost controller :) lol... yeah im getting it checked monday i did find a link on forums bout this problem it might be. ive been told it could be coilpacks or sensor problem but i will find out at my mates garage. clearer picture is attached..

cheers for the advice! ive been guessing it would be coilpacks but i been told aswell that the light coming on has nothing to do with the coilpacks so getting confused with all the different advice.

post-45807-1217402893_thumb.jpg

Edited by b3za
MissR34 Grand Master

MissR34

Posted
Posted

errr.....when my coilpacks went...one at a time....three times before i ended up getting splitfires.........the engine light came on.......just be careful of "ghost"error coeds when plugging in the ecu to a laptop....sometimes the real problem dosent come up and something else will.... e.g mine came up with crank angle sensor malfunction lots of times when it was a colilpack!

THR34T Mentor

THR34T

Posted
  • Author
Posted

alright well thanks alotfor the advice! i think im convinced to change coilpacks after monday unless something else comes up which i havent heard before but defaintly kept in my mind. i did suggest to my mechanic mate that it most probably is the coilpacks but i shall let you guys know on monday what comes up.

thanks again

AlexR34 Proficient

AlexR34

Posted
Posted
alright well thanks alotfor the advice! i think im convinced to change coilpacks after monday unless something else comes up which i havent heard before but defaintly kept in my mind. i did suggest to my mechanic mate that it most probably is the coilpacks but i shall let you guys know on monday what comes up.

thanks again

Lol i remember when i was posting the same question recently. Most of the time that light comes when the coil packs are gone. Also before blowing money on the coil packs check that its not the oxygen sensor because when that goes, you get the same light aswell.

Theres a way to get the error code from your car just using a paper clip. Im sure someone on here can give you the manual on how to do it. Its super simple and super useful.

MissR34 Grand Master

MissR34

Posted
Posted (edited)

when my car was losing a coilpack - it would lose a cylinder and then gain it back - everytime it lost a cylinder the engine light came on, and when it gained the cylinder back the engine light would go off (weird huh!!)

anyways i dont think it is a waste of money to go and buy some Splitfires - i gained 7 kW@ :( and in the end the stock coilpacks are gonna die anyway - mainly due to heat and age....in my opinion if i knew that when my first coilpack went i would have gone and replaced them then, instead of going and spending $200 on each coilpack i had to replace (which ended up being three of the buggers)

best thing is to do also is to get it on a dyno and that will tell u if ur o2 sensor has died.

Edited by MissR34
666DAN Grand Master

666DAN

Posted
Posted

Paper clips at the ready!!!!!

As the document says, turns the ignition to "on" short the two terminals indicated on the consult plug (clipped covertly on the underside of the dash near where your right knee lives), count the flashes, look up the code

diagnostic.doc

Im_RiCK_JaMeS_BiArTcH Enthusiast

Im_RiCK_JaMeS_BiArTcH

Posted
Posted (edited)

Mine was doing similar last night but i have already had coil packs replaced not long ago. The engine light will come on under load in 5th gear but it will only flash for a second.. only any one got any clues?

Edited by Im_RiCK_JaMeS_BiArTcH

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Stagea Front CV Axle Question

      By Duncan · Posted

      I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • soviet_merlin
      Stagea Front CV Axle Question

      By soviet_merlin · Posted

      One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • S1_C34
      Stagea Front CV Axle Question

      By S1_C34 · Posted

      I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...