Jump to content
SAU Community

Recommended Posts

When I first bought my car there were a few little things that I wanted to fix. Things like the vents (like every 32), and the trim falling off. You know the small things that bother you about your car. The vents got fixed relatively soon after I bought my car but I just never got round to sticking the trim back on. At some point in time the passenger side door was glued back but not very well, and glue had come through the fabric. So there was a hard patch. I decided I’d have a go at re-trimming the doors myself as I didn’t think it would be that hard and money is pretty tight. Over the last couple of weekends I’ve stripped the back out and removed all the trims. Slowly I’m getting done.

As my 32 is the later model is has the blue/grey colour scheme. I tried to match the suede that I used as best as I could to the side colours of my seats. It’s similar to the R32 GTR trim but with more grey in it. Photos are somewhat in order with some notes on each.

My trim when I got my car, its been like this for over 2 years

Trim1.jpg

Trim2.jpg

the door panel removed

Trim3.jpg

Trim4.jpg

the rear semi stripped

Trim25.jpg

the glue holding it on was relatively old so just peeled off

Trim5.jpg

Trim6.jpg

it looked like someone had tried to glue the material back on once before with the driver side as there were parts that were quite sticky

Trim7.jpg

after cleaning it up with some turps and then metho to remove the oilyness

Trim8.jpg

the material that I used and the GTR colour

Trim9.jpg

Trimgtr.jpg

using the old material as a template to cut the new material. This was an important step as the material has to line up in the edges on the trim insert

Trim10.jpg

Trim11.jpg

the material just placed over the door

Trim12.jpg

this jumps a little as I forgot to take pics when doing the front doors, but mask the insert off with masking tape. Makes it easier when applying the contact adhesive

Trim13.jpg

the rear material placed on the door

Trim14.jpg

After this I used a plastic paint scraper to press the material into the corners to make sure everything lined up. Then put 10 or so pins into the door to hold it in place. Doing a small section first to line it up and then doing small parts until the whole thing is done.

Trim16.jpg

the glue being applied

Trim15.jpg

The finished rear door panel. Depending on the light, the colour of the material changes. With the flash on it looks really grey which isn’t really what it looks like. Its Platinum Suede that I used

Trim17.jpg

Trim18.jpg

The front door, sorry about the crap light and fuzzy photo

Trim24.jpg

Whilst removed the back seat I managed to mangle one of the clips that hold it in place, it was definitely not going to hold the seat in once I was done. So I FASTED the part number and got some new ones from Nissan. Around $8 each.

Trim26.jpg

When I got my car the A pillar trims had seen better days, all the vinyl was cracked and peeling off.

Trim19.jpg

Trim20.jpg

Trim21.jpg

While I had everything apart I figured I’d fork out the $130 per trim and replace them both. My luck too, Nissan had them in stock as someone must’ve ordered them and never picked them up. The part numbers and new trims

Trim22.jpg

Trim23.jpg

I haven’t finished putting it all together yet as I still have one last rear panel to do. But I am pretty happy with how it’s turned out so far. One thing I can say is that contact adhesive is a bitch.

Edited by mark32gts-t
Link to comment
https://www.sau.com.au/forums/topic/230270-my-r32-door-retrim/
Share on other sites

Very nice!

My r32 had the same problem.

I just bought some spray glue and stuck back the fabric, a quick fix which will probably fall off in the future :P

I think all r32's have destroyed A-Piller trims. Thanks for the price/part numbers ;)

Awesome job.

Question: where can one buy the material?

Cheers for all the 'good works'

the material/seude is manufactured by Fabtex. My bosses sister sells fabric/material to furniture upholsterers so I asked her if she could get some for me. I believe it is actually for automotive use so worked out well.

I bought 2 meters but only really needed 1. Considering I was paying cost price it was still expensive at $23/metre

The link and colours, although colours dont seem that accurate as platinum looks almost brown: http://www.fabtex.com.au/products/suede.php

Mark good job. Want to help a bro out :down: i need that work done to my gtr. I Just got to get around to it one day.

Where you get the cloth from and how much and what sort/color. How long did it take you?

Not taking into account panel removal, the cleaning, cutting, masking, lining up, and slowly glueing probably takes around 3 hours per door. But in saying that I would consider myself a bit of a perfectionist.

excellent job is i keep my r32 i will do this to it aswell, however with my r32 mine came with no material at all!! Hame

I remember looking at some 32s before I bought mine that had the material already removed. I would say its virtually impossible to cut new fabric without the original trim cloth

If anyone is keen for the left over material after I'm done there should be enough to do all 4 panels. Will have to measure it exactly. Think the role is 1.5 meters wide

Edited by mark32gts-t

I first tried water based contact adhesive. It didn't work as the glue on the material was taking too long to dry. So I just used Selleys contact adhesive, it said heat resistant on the tin. so if it stands in the sun they wont just peel off again

Well I fitted the new A-pillar trims today. Wasn’t much of a hassle. Took more pics of the steps. My old ones were pretty much wrecked and went straight into the bin.

To make it easier getting them off, remove the rear parcel shelf. It’s just got push in clips that hold it on

1.jpg

2.jpg

Next thing is to remove the seatbelt bolts so the trim piece can be pulled off.

3.jpg

4.jpg

5.jpg

The plastic part that feeds the seatbelt through the trim also has to be unclipped so the belt can be fed through once the trim is off. It unclips from the bottom.

6.jpg

Next step is to pull the trim off. You’ll be chucking it anyway so don’t worry too much about breaking anything. Some of the plastic broke out of mine when I pulled them off.

7.jpg

8.jpg

As you can see mine are brittle and falling apart

9.jpg

10.jpg

11.jpg

The new one ready to go in

12.jpg

The next step is to feed the belt back through the rear hole, line it up and press the trim back into place. There are a total of 11 clips that need to go in. You’ll know when all the clips are in as it sits nicely against the roof and rear window. I founding working from the rear bottom clip first worked the best.

13.jpg

The new trim looks good and doesn’t have any vinyl hanging off like the previous one.

14.jpg

15.jpg

Bolt the seatbelts back in and make sure they are done up tight enough. Dont want those coming loose.

Next step is to put the rear panels back on. But will have to wait till another day. Had some other stuff I needed to do.

Cheers, Mark

Edited by mark32gts-t

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...