Jump to content
SAU Community

Recommended Posts

LOL I had a similar scenario about a month ago though the car was in for a 20,000 though it was on 136,000 and also 2 years later, though the oil was quite thin, but I would not say water thin.

Still had the original sticker to be serviced at 20,000 on it. But that isn't to say it wasn't done by someone else.

As far as the engine oil breaking down to be as thin as water. The viscosity will break down in the oil the more use it gets but to what extent I cannot say.

Link to comment
https://www.sau.com.au/forums/topic/230423-engine-oil/#findComment-4049246
Share on other sites

your telling me the worse thing is the engine needs to be rebuild but the oil company said they will pay for it if the test show the oil has thined out

That's something at least. Care to post the oil and engine combo?

Link to comment
https://www.sau.com.au/forums/topic/230423-engine-oil/#findComment-4051127
Share on other sites

cant post the oil brand yet

engine combo

rb30 block

standard crank

acl race sereis bearings

comectic head gasket

arp headstuds

spool rods

arias pistons

rb 25 head

272 cams

moded standard intake

850cc injectors

custom exhaust mainfold

garrett gt42r

50 wastgate

3 1/2 exhaust

ems 6860

we just pissed were just about to put some decent boost in it

Edited by craked
Link to comment
https://www.sau.com.au/forums/topic/230423-engine-oil/#findComment-4051173
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...