Jump to content
SAU Community

Recommended Posts

Hey guys, I'm Nigel, a member from Adelaide.

I'm asking for a large favour for monday (04/08/08)

Myself and a mate land at Brissy airport at 9am, and need to get to Morayfield to pick up my new beast from another member, ready to drive home to Adelaide. I would greatly appreciate a lift from a generous member if it was in any way possible. The trip will of course be rewarded with petrol money. The trip is 45kms approx, and would prefer a faster and more economical alternative to a $100 taxi for a <45 minute trip.

I also need to make my way to Queensland transport on piper street at Morayfield also, but thats only a $15 taxi from the car's location, so i have that covered.

Hoping that a member finds it in thier heart to give 2 guys a lift on thier way to work or whatever.

Any help would be greatly appreciated.

Nigel.

Link to comment
https://www.sau.com.au/forums/topic/230477-urgent-help-needed-for-monday/
Share on other sites

Hey guys, I'm Nigel, a member from Adelaide.

I'm asking for a large favour for monday (04/08/08)

Myself and a mate land at Brissy airport at 9am, and need to get to Morayfield to pick up my new beast from another member, ready to drive home to Adelaide. I would greatly appreciate a lift from a generous member if it was in any way possible. The trip will of course be rewarded with petrol money. The trip is 45kms approx, and would prefer a faster and more economical alternative to a $100 taxi for a <45 minute trip.

I also need to make my way to Queensland transport on piper street at Morayfield also, but thats only a $15 taxi from the car's location, so i have that covered.

Hoping that a member finds it in thier heart to give 2 guys a lift on thier way to work or whatever.

Any help would be greatly appreciated.

Nigel.

cant help with the lift but i'd suggest the train

yeah i was gonna suggest the train whist reading too.. would be alot more convenient.. take train to neatest station and bus/taxi it to his house then drive to qld transport.. alternatively if your just looking to trade in the plates just drive to adelaide and trade them in there.. its do-able

i would have been willing to give you a lift but have to work

good luck with the new car :)

i figured most people would be working. Time is an issue, hence i dont wanna wait for the train. Already checked the time tables, and i'd be losing over an hour of precious travel time. Car is unregoed, so cant drive it till i get permits from qld transport, hence all the taxi's.

Hmm I'd be happy to run you around for the morning but not sure I can get the time off work ><

Surely there is someone on here who works casual work or something?

We don't have any luggage by the way, nor do we smell.... (contrary to rumours)

Easy way to make $50 for 45 minutes of someones time?

We need to hit the road to home by about 11am, so thats why i'd prefer no taxi queues or trains.

Cheers guys

Heading down the coast that day for work so can't help you out. No offence but you probably should have picked a more appropriate username before you posted this request lol :) Good luck and hope you find someone to take u there!

Heading down the coast that day for work so can't help you out. No offence but you probably should have picked a more appropriate username before you posted this request lol :) Good luck and hope you find someone to take u there!

haha yeh, i realised that this morning. "BIT SUS" are my rego plates here in SA, they used to be on my track spec forester. :O

PM Sent..........

Thanks for your help guys! A very generous member has come forward to the rescue!

i'll post up some photos of the new whip when she's home safe after a 2100km journey.

Nigel.

did i read correctly?

track spec forester?

i didn't realise there were track spec station wagons....

unless the race includes picking up shopping, kids from rugby etc. sorta like what the v8 should do to make it more realistic....

did i read correctly?

track spec forester?

i didn't realise there were track spec station wagons....

unless the race includes picking up shopping, kids from rugby etc. sorta like what the v8 should do to make it more realistic....

"track spec" =

110KW NA

1290kg

racing logic coilovers.

full whiteline range

18x8's

5 degrees castor

-2.5 camber

handled like a go kart. really miss it ;) was perfect for hills runs would outrun bikes

Haha nah it's true, any decent car will out-corner a decent bike. Look at the difference in how much rubber is on the road - two contact patches the size of a 20c piece versus four big 235mmx20mm or whatever patches. A well-ridden bike can be damn hard to catch but a well driven car should be able to hold more corner speed, the only saving grace for the bike is that it can use wider lines but it takes a LOT of commitment to ride that hard.

It's fun trying though :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...